2.Models: Imix
3.Power：according the Nameplate.
2) Digital Controller of Both Time and Speed: It Is in the Front Panel.
3) Start/Stop:
4) Safety Lid and Capsule Clip: Open the Safety Lid, Fit the Amalga Capsule, Glass Ionomer or Other Material into the Clip, While Working, the Safety Lid Must Be Closed.
Description
This is a machine suitable for mixing silver amalgam powder and mercury in dentistry and obtaining silver amalgam by vibration. It is a silver amalgam machine with low noise, high safety performance, and easy operation.
Specification
Product Name：Dental Amalgamator
Models: IMIX-M3, IMIX-M6
Shell Material: Plastic
Power: According to the Nameplate
Motor Power: 35W
Storage Conditions: -10∽40℃, Relative Humidity≤80%, No Corrosive Gas and Ventilated Places.
Warranty: 1 year
Package Included
1* Dental Amalgamator
4* Springs
2* Fusing core 0.5A Ф5X20
1* English Instruction
1* Warranty Card
Key Features
High Security: It has a security system, when the lid is open, the motor will stop. You do not have to worry about the motor will inadvertently hurt you.
Intelligent Design: This machine comes with a memory function so you don't have to readjust the model every time, which will save you a lot of time.
Low Noise: It works at a noise level of no more than 65 decibels, which is less noisy than other mixers and can provide you with a quieter working environment.
Easy to operate: There is a green switch at the back of the machine. Just turn on the switch, the display will light up, and then the power is on and you are ready to use.
Easy to Clean: Since the shell of this machine is made of plastic, it is waterproof and has a smooth surface, making it less likely to accumulate dust. If there is dust, just wipe it off with a towel.
Simple Switch: Start the device once, it works once. If a pause is needed, just keep pressing the Start button for 3 seconds. If a pause is needed, press the button too. It's very easy for you to use.
Adjustable Speed Mode: The machine has two speed modes: "L" is the slow speed mode and "H" high speed mode. Easy for you to choose.
Customer Service: We aim to provide quality products and services. If you have any problems, please free to contact us. We will reply and solve the problem for you as soon as possible.
Details
Safety Lid: Motor will stop once the lid is open, which is a very safe system for the customer.
Digital Controller of Both Time and Speed: There are digital controls for time and speed on the front panel, so you can easily monitor the time and speed of the machine's operation.
Memory Function: This feature will save you a lot of time as you don't have to readjust the mode every time.
Application
The product is suitable for mixing silver alloy powder and mercury in dentistry and obtaining silver amalgam by vibration.
Notes
- For the first use, please use high speed idling for 60 seconds, which is favorable to the site adjustment and prolongs service life.
- This device must be used by specific persons instead of nonprofessional ones.
- Please keep it in a place where it does not come in contact with water or any other liquid.
- Please store and use it in a place where there is no air pressure, temperature, humidity, ventilation, sunlight, dust, salt, ions, or other bad air.
- Please place it in a stable place without any possibility of tilting, shaking, or bumping.
- Please keep it away from chemicals and chemical gases.
- Before you run the machine, please use a screwdriver to remove the red set screw under the device in a counterclockwise direction.
Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and
state and local regulatory agencies. If the item is subject to FDA regulation,
I will verify your status as an authorized purchaser of this item before shipping of the item.
If you have questions about legal obligations regarding sales of medical devices,
you should consult with the FDA's Center for Devices and Radiological Health:
https://www.fda.gov/cdrh/devadvice/
https://www.fda.gov/cdrh/industry/support/index.html
Thank you for your cooperation.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
