Fitment
Designed to fit the following models (for reference only):
Yamaha MT-09 2024-2025
Yamaha MT-09 SP 2024-2025
Yamaha MT-09 Y-AMT 2024-2025
Please compare the shape and plug with your original tail light and confirm compatibility with your motorcycle before purchase.
Description:
PERFECT GIFT FOR YOURSELF OR YOUR FAMILY
WHY LOOK THE SAME AS EVERYONE ELSE?
SIMPLE UPGRADE TO MAKE YOUR MOTORCYCLE STAND OUT!!
WHY LOOK THE SAME AS EVERYONE ELSE?
SIMPLE UPGRADE TO MAKE YOUR MOTORCYCLE STAND OUT!!
Product Description
Condition: 100% Brand New & High Quality
Material: PMMA + PC + PP
This integrated LED tail light combines tail light, brake light, and left/right turn signals into one
compact unit. It features high brightness, long service life, and a stylish appearance, making it an
ideal upgrade or replacement for your motorcycle.
Features
100% brand new and high quality
Super bright LED, long-lasting and energy-saving
Tail, brake, and left/right turn signals integrated in one unit
Simple bolt-on installation (no modifications to housing in most cases)
Direct replacement for the original tail light
Easy wiring, compatible with most motorcycle wiring systems
No installation instructions included – professional installation is recommended
Specifications
Lens Material: PMMA / PC / PP
Lens Color: Red/Clear/Smoke
Light Color: Red / Amber
-Reference OEM NO.:BME-84700-00-00
Driving (Running) Light Power: 12V
Brake Light Power: 12V
Turn Signal Power: 12V
Note: If the turn signals flash abnormally (too fast or error code), a resistor is required.
Wiring Diagram (General Guide)
Most bikes (may vary by model, please check your bike’s wiring):
Black wire: Negative (Ground)
Green wire: Brake light (+)
Red wire: Running light / Tail light (+)
Using Resistors for Turn Signals
If your turn signals flash too fast or show an error, follow these general steps:
Connect one end of the resistor to the ground wire on your motorcycle’s turn signal harness.
Connect the other end of the resistor to both:
The YELLOW wire from our tail light (turn signal), and
The positive turn signal wire from your motorcycle’s turn signal harness.
Repeat the same procedure for the other side (left/right turn signals).
How to Use the Red Quick Connectors
Place one wire into one channel of the connector.
Place the second wire into the other channel.
Press down the metal pin so it pierces both wires, creating a bridge between them.
If using a resistor, place one end of the resistor in the middle of either channel together with one
of the wires, then press down the pin.
Notes
Professional installation is highly recommended; no installation instructions are included.
If the light does not function properly, you may need to install resistors.
Due to different monitor and light settings, color may differ by up to 5% from the
pictures shown.
Please ensure this part fits your motorcycle before placing the order.
Product Description
Condition: 100% Brand New & High Quality
Material: PMMA + PC + PP
This integrated LED tail light combines tail light, brake light, and left/right turn signals into one
compact unit. It features high brightness, long service life, and a stylish appearance, making it an
ideal upgrade or replacement for your motorcycle.
Features
100% brand new and high quality
Super bright LED, long-lasting and energy-saving
Tail, brake, and left/right turn signals integrated in one unit
Simple bolt-on installation (no modifications to housing in most cases)
Direct replacement for the original tail light
Easy wiring, compatible with most motorcycle wiring systems
No installation instructions included – professional installation is recommended
Specifications
Lens Material: PMMA / PC / PP
Lens Color: Red/Clear/Smoke
Light Color: Red / Amber
-Reference OEM NO.:BME-84700-00-00
Driving (Running) Light Power: 12V
Brake Light Power: 12V
Turn Signal Power: 12V
Note: If the turn signals flash abnormally (too fast or error code), a resistor is required.
Wiring Diagram (General Guide)
Most bikes (may vary by model, please check your bike’s wiring):
Black wire: Negative (Ground)
Green wire: Brake light (+)
Red wire: Running light / Tail light (+)
Using Resistors for Turn Signals
If your turn signals flash too fast or show an error, follow these general steps:
Connect one end of the resistor to the ground wire on your motorcycle’s turn signal harness.
Connect the other end of the resistor to both:
The YELLOW wire from our tail light (turn signal), and
The positive turn signal wire from your motorcycle’s turn signal harness.
Repeat the same procedure for the other side (left/right turn signals).
How to Use the Red Quick Connectors
Place one wire into one channel of the connector.
Place the second wire into the other channel.
Press down the metal pin so it pierces both wires, creating a bridge between them.
If using a resistor, place one end of the resistor in the middle of either channel together with one
of the wires, then press down the pin.
Notes
Professional installation is highly recommended; no installation instructions are included.
If the light does not function properly, you may need to install resistors.
Due to different monitor and light settings, color may differ by up to 5% from the
pictures shown.
Please ensure this part fits your motorcycle before placing the order.
|
