Lethal Threat designs:

Skull/Poker/8 Ball/Web

Windshield visor

Apply to outside of windows

Easy installation

Size: 5"x60"

Tools Needed:

1. Window cleaner

2. Single edge blade or x-acto knife

3. Squegee or credit card

4. Hair dryer

Preparation Steps:

1. Window and visor should be at room tempera-ture, 70°F (21°C) or above before application.

2. Clean windshield with household window cleaner and dry completely.

3. Do not use any liquid between your visor strip and the glass.

Application direction:

1. Carefully remove paper liner from back of windshield visor strip. Fit visor strip to the outside of your windshield, centering the design in the top middle of the windshield.

2. To apply, start in the middle and work, outward towards the outer edges of the winshield. To assist in the installation on sharply curved windshields, a hair dryer can be used to stretch the visor material.

3. Using an x-acto knife or blade, cut the windshield visor strip to the exact size of the windshield, cutting excess material off.

4. To remove air bubbles, use a squegee or credit card moving the air bubbles toward the edge. This step should be repeated in two to three days after installing the strip.

NOTE: Placement of visor on windshield may not be allowed for street use. Please check your local city/ state ordinance.