【Product Science Popularization】
The function of dental glass ceramic sintering paste
Dental glass ceramic sintering paste plays a crucial role in the sintering process of dental glass ceramics. It is mainly used to fully crystallize glass ceramic materials at high temperatures, thereby achieving ideal physical and chemical properties. The specific functions and usage precautions of sintering paste are as follows
The function of dental glass ceramic sintering paste: Sintering process: Sintering paste helps glass ceramics to form at high temperatures, achieving complete solidification of the material and improving its performance. Temperature control: The use of sintering paste requires strict temperature control to avoid changes or damage to material properties. Precautions for using dental glass ceramic sintering paste
·Avoid sintering temperatures exceeding the crystallization temperature of the material to avoid affecting its structure and properties. Through the above analysis, we can see that dental glass ceramic sintering paste is not only crucial for the sintering process, but its correct use is also one of the key factors to ensure successful repair.
【Product Name】 Sintering Paste

【Product Specification】10ml

【Scope of application】 Suitable for veneers, inlays, high inlays, partial crowns, single crowns, and bridges that are inconvenient to place directly on sintered discs or nails during the porcelain or glaze process.

The product is composed of alumina, quartz, ethyl cellulose, polyethylene glycol, and distilled water.

【Intended use】This product is used for ceramic restorations that are stable and directly placed on sintering plates or nails during the porcelain or glaze process, and can also be used to protect ceramic restorations placed on sintering nails during the firing process.

【Usage】

1. Crown bridge: Loosen the sealing cover, gently push the needle tube piston handle, push out a soybean sized amount onto the sintered retention nail, or directly inject it into the crown of the restoration, and then place the restoration on the sintered nail.

2. Veneer, inlay, high inlay; Loosen the sealing cover, gently push the needle piston handle, push out a soybean sized amount at the bottom of the restoration body, and then place the restoration body directly on the sintering plate.

【Matters needing attention】

1. After use, it is necessary to tighten the cover, seal it and store it at room temperature in a dark place

2. The amount used should not be too much each time, only the size of soybean seeds is needed.

3. After sintering, the sintered paste appears as a white lump, and there may be a small amount of adhesion on the repair body. Timely use a vibration cleaning agent to clean it.

4. The filling amount of sintered paste in the repair body should be appropriate to prevent contact between the sintered paste and the external staining paste at the edge of the repair body from damaging the external staining effect.

【Physical and chemical properties】

1. Appearance: The surface is smooth and clean, the outer packaging is flat, without scratches, scratches, leaks, residual contents, and impurities

2. Color: White or milky white.

3. Form: Paste

Note：The sale of this item may be subject to regulation by federal and provincial regulatory agencies.  If so, do not bid on this item unless you are an authorized purchaser.  If the item is subject to regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.