Professional adjustable solar panel mounting brackets designed to provide a secure and flexible installation for virtually all standard framed solar panels.
The mounting angle can be adjusted between 15° and 30°, allowing the solar panel inclination to be selected according to the installation position and available space.
This versatile mounting system can be used for flat roof, ground and suitable flat wall installations, making it an excellent solution for domestic, commercial, off-grid and DIY solar PV projects.
The mounting system is designed to work with virtually all standard aluminium-framed solar PV panels. It is not restricted to a particular solar panel wattage, making it suitable for modern high-power modules as well as smaller solar panels.
Compatibility depends primarily on the physical dimensions and frame of the solar panel rather than its wattage.
The two extendable rear aluminium support legs allow the inclination of the solar panel to be adjusted from approximately 15° to 30°.
Tilting a solar panel instead of installing it completely horizontal can improve its exposure to sunlight and also helps rainwater run from the surface of the module. The optimum angle and orientation will depend on the installation location, season and site conditions.
The adjustable mounting brackets provide a flexible solution for many different solar installations, including:
The installer must always select appropriate fixings for the supporting structure and ensure that the mounting surface can safely withstand the weight of the solar panel and all applicable wind and environmental loads.
The mounting brackets are manufactured from aluminium, providing a strong but lightweight supporting structure suitable for outdoor solar PV installations.
The adjustable design makes it considerably more versatile than a fixed-angle bracket and allows the same mounting system to be used across a wide range of solar panel projects.
Solar panels have increased significantly in size and power over recent years. This mounting system is suitable for standard framed photovoltaic modules and is not limited to the older 100W-550W panel range.
It can therefore be used with small off-grid modules as well as modern full-size residential and commercial solar panels, subject to the panel dimensions, installation method and structural requirements.
Installing a solar panel at an appropriate inclination can improve the amount of direct sunlight reaching the module compared with a completely horizontal installation. The adjustable 15°-30° design gives the installer flexibility to choose an angle appropriate for the particular site.
An inclined panel also allows rainwater to drain more easily from the glass surface, which can help reduce the accumulation of standing water and dirt.