• CPU
    1. Ryzen™ Threadripper™ PRO 3000WX (up to 64C)
    2. Single sWRX8 4094 socket; CPU TDP supports up to 280W
  • chipset
    1. AMD WRX80 Chipset
  • Memory
    1. 8 x DDR4 DIMM slots supports
    2. 8 channels memory architecture (1 DIMM per channel)
    3. Support up to DDR4 3200/2933/2600 MHz
    4. Support for UDIMM (ECC), RDIMM, 3DS RDIMM and LRDIMM memory modules
    5. Support system memory capacity up to 1024GB
  • Audio
    1. Realtek® ALC1220-VB codec
    2. High Definition Audio
    3. 2/4/5.1/7.1-channel
    4. Support for S/PDIF Out
  • Internet
    1. Dual Intel® X550 10GbE LAN
    2. Dual Intel® i210AT GbE LAN (NCSI MLAN)
  • Expansion slot
    (Slot7) PCIe x16 (running at Gen4 x16)
    (Slot6) PCIe x16 (running at Gen4 x16)
    (Slot5) PCIe x16 (running at Gen4 x16)
    (Slot4) PCIe x16 (running at Gen4 x16)
    (Slot3) PCIe x16 (running at Gen4 x16)
    (Slot2) PCIe x16 (running at Gen4 x8)
    (Slot1) PCIe x16 (running at Gen4 x16)
  • Storage Device Interface
    1. 4 x SATA 6Gb/s connectors (support software RAID 0; RAID1; RAID5; RAID10)
    2. 2 x M.2 Connectors (Socket 3; M key; Form Factor 2242/2280 ; Supports PCIe gen4 x4 or SATA mode)
    3. 2 x slimSAS (PCIe gen4 x4 or 4x SATAIII) + 1 x slimSAS (PCIe gen4 x4) connectors
  • USB
    1. 1 x USB Type-C™ port on the back panel, with USB 3.2 Gen 2 support
    2. 5 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
    3. 1 x USB Type-C™ header onboard, with USB3.2 Gen2 support
    4. 2 x USB 3.2 Gen 1 header onboard
    5. 1 x USB 3.2 Gen 1 vertical connector onboard
    6. 1 x USB 2.0 header on board
  • Internal socket
    1. 1 x 24-pin ATX main power connector
    2. 1 x 8-pin ATX 12V CPU power connector
    3. 1 x 8-pin ATX 12V GPU power connector
    4. 1 x CPU fan header
    5. 6 x system fan headers
    6. 4 x SATA 6Gb/s connectors
    7. 2 x M.2 Socket 3 connectors
    8. 3 x slimSAS connectors
    9. 1 x front panel header
    10. 1 x front panel audio header
    11. 1 x USB Type-C™ header, with USB 3.2 Gen 2 support
    12. 1 x USB 3.2 Gen 1 vertical connector
    13. 2 x USB 3.2 Gen 1 header
    14. 1 x USB 2.0 header
    15. 1 x Thunderbolt™ add-in card connector
    16. 1 x Trusted Platform Module(TPM) header (2x6 pin, for the GC-TPM2.0_S module only)
    17. 1 x serial port header
    18. 1 x chassis intrusion header
    19. 1 x Clear CMOS jumper
    20. 2 x SATA SGPIO headers
    21. 1 x BMC_VGA jumper
    22. 1 x BMC_WATCHD jumper
    23. 1 x SMB_IPMB connector
    24. 1 x PMBUS header
    25. 1 x Speaker
  • Real panel unit connection
                     socket
    1. 1 x D-sub port
    2. 1 x serial port
    3. 1 x USB 3.2 Gen 2 Type-C port (red)
    4. 5 x USB 3.2 Gen 2 Type-A port (red)
    5. 2 x GbE RJ-45 ports
    6. 2 x 10GbE RJ-45 ports
    7. 1 x optical S/PDIF Out connector
    8. 5 x audio jacks
  • I/Ocontrollers
    1. ASPEED® AST2500 BMC chip
  • Hadeware monitoring
    1. Voltage detection
    2. Temperature detection
    3. Fan speed detection
    4. Fan speed control
      * Whether the fan speed control function is supported will depend on the fan you install.
  • Operating Properties
    1. Operating temperature: 10°C to 40°C
    2. Operating humidity: 8 - 80%
    3. Non-operating temperature: -40°C to 70°C
    4. Non-operating humidity: 5% - 95%
  • PCB norm
    1. CEB Form Factor; 30.5cm x 26.7cm