Specifications(Please Make Sure You Take The Proper Measurements Before Purchasing)

  • Thickness:                 Each Spacer would be 1" Wide
  • Color:                         Black
  • Hub Bore Size:          67.1mm 
  • Vehicle Bolt Pattern:  5x114.3mm or 5x4.5''
  • Wheel Bolt Pattern:   5x114.3mm or 5x4.5''
  • Thread Pitch:             M12x1.5 / 12mm x 1.5 / 12x1.5 

Compatibility(The compatibility information is just for reference)

 

 YearMakeModel
For2011-2014Chrysler200
For2007-2010ChryslerSebring
For1996-2000DodgeAvenger
For2000-2014DodgeAvenger
For2007-2012DodgeCaliber
For1991-1996DodgeStealth
For2003-2005DodgeStratus
For1991-1998EagleTalon
For2001-2012FordEscape
For2006-2012FordFusion
For1994-1996FordProbe
For2020-2022GenesisG70
For2017-2022GenesisG80
For2017-2022GenesisG90
For2006-2016HyundaiAzera
For2007-2022HyundaiElantra
For2011-2016HyundaiEquus
For2010-2016HyundaiGenesis
For2010-2016HyundaiGenesis Coupe
For2018-2022HyundaiIoniq
For2018-2022HyundaiKona
For2020-2022HyundaiPalisade
For2001-2022HyundaiSanta Fe
For2006-2022HyundaiSonata
For2004-2008HyundaiTiburon
For2005-2022HyundaiTucson
For2013-2020HyundaiVeloster
For2020HyundaiVenue
For2008-2012HyundaiVeracruz
For2003-2005HyundaiXG350
For2007-2017JeepCompass
For2008-2017JeepPatriot
For2004-2009KiaAmanti
For2014-2019KiaCadenza
For2022KiaCarnival
For2022KiaEV6
For2010-2022KiaForte
For2021KiaK5
For2015-2020KiaK900
For2017-2022KiaNiro
For2008-2020KiaOptima
For2007-2009KiaRondo
For2002-2004KiaSedona
For2015-2021KiaSedona
For2011-2022KiaSorento
For2014-2022KiaSoul
For2005-2022KiaSportage
For2019-2021KiaStinger
For2020-2021KiaTelluride
For2007-2012LincolnMKZ
For2004-2021Mazda3
For2012-2014Mazda3 Sport
For2006-2008Mazda5
For2012-2015Mazda5
For2003-2020Mazda6
For1994-2002Mazda626
For2013-2022MazdaCX-5
For2010-2012MazdaCX-7
For2014-2022MazdaCX-9
For1995-2002MazdaMillenia
For2000-2005MazdaMPV
For2006-2015MazdaMX-5 Miata
For1993-1997MazdaMX-6
For2002-2003MazdaProtege
For1986-1995MazdaRX-7
For2004-2011MazdaRX-8
For2001-2010MazdaTribute
For1991-1999Mitsubishi3000GT
For1990-2012MitsubishiEclipse
For2005-2011MitsubishiEndeavor
For1994-2012MitsubishiGalant
For2004-2017MitsubishiLancer
For2003-2021MitsubishiOutlander
For1995-1996ToyotaTacoma
   
Package Included
 
2pcs  Wheel Spacers
 
1 pair Gloves
 
1x Steel wire ball
 

[Important Notes]

 

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.

2. Measure the fender gap and stock bolt length to choose suitable thickness.

3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.

4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.

5. Returns are only accepted if unused and not  installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)

-- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.


-- For 1 inch or less or special adapters,

If your vehicle requires 2" spacers but you purchased ≤1" , the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.


-- For 2 inches or more or special adapters,

If your vehicle requires 1" spacers but you purchased ≥2", the stock studs are shorter to hold the spacer safely, you need to exchange to small size adapters or purchase longer studs yourself.

 

What should I pay attention to during installation?

 

1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.

2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.

3) DO NOT proceed if both of the wheel spacer do not fit.

4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.

5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).

6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
7)All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.

8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.

 
 
 

 

1.We only accept PayPal. PayPal is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding.

2.All Paypal Payments must be Confirmed. Payment must be made within 48hrs of the auction end time. Non-Paying bidders will be reported.

3.When you get your package,maybe you will pay some charges, it's taxes for local customs,not pay to us, and the fees are depends on the customs, all buyer are same.

1.Items will be shipped within 2 business days after payment is received.

2.We ship to your eBay address. Please make sure your eBay address is correct. Buyer takes responsibility if eBay address is wrong.

3.Import duties, taxes and charges are not included in the item price or shipping charges. Please check with your country customs office for these additional charges.

4.We shipping using UPS or USPS from our nearest warehouse to you. Tracking numbers will be emailed upon shipment.

1.Please feel free to email us if you have any question.

2.We appreciate you contact us via eBay message when you are not satisfied rather than open case or leave negative feedback directly. We'll try our best to solve the issue.

3.Refund will be issued once we receive your returned items. Buyer is responsible for all return shipping charges.

4.Please contact us for return process before you return the item.

5.All items for exchange or refund must be returned in "as new" condition.

We are the responsible seller ,always provide high-quality products and best service .If you have any questions, please contact us, and will try our best to help you. Please contact us by eBay Message, and we will reply you within 24 hours. Thank you very much!
We are the professional auto parts manufacturer , and provide line lock, AN hose end fittings , fuel line , fuel filter , fuel regulator , exhaust cutout , exhaust tips , exhaust muffler and so on .The quality of the product to be secured. If you have any questions or any needs , please contact us , and will try our best to help you.
PushAuction