NOTE:
This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.Pls confirm the item if it can matches your car before you purchase.
Fitment system may not be 100% accurate, if you are not sure which bulb size you need, please check vehicle manual or stock bulb model.
Information：
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. it will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.For example:
For 2004 Ford F 150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F 150 ,XL Crew Cab Pickup 4-Door 2.7L
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. it will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.For example:
For 2004 Ford F 150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F 150 ,XL Crew Cab Pickup 4-Door 2.7L
LED Headlight:
Plug Type: 9005/HB3 (High beam) + 9006 (Low beam)
Power: 60W/Bulb
LED Quantity(each bulb): 2pcs* chips
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: White 6000K
IP65 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 100,000hrs lifetime
Usage: headlight,fog light
Plug Type: 9005/HB3 (High beam) + 9006 (Low beam)
Power: 60W/Bulb
LED Quantity(each bulb): 2pcs* chips
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: White 6000K
IP65 rated water and dust seal,360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 100,000hrs lifetime
Usage: headlight,fog light
LED headlight conversion kit
Super bright chip(USA),360 degree clear beam no blind zone
Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation
All-in-one heat conduction keep the light bulb in appropriate working temperature
Built-in constant current CPU,instant full brightness without start-up relay
Two-way heat dissipation channel
1.All-in-one aluminum profile as heat conduction system,360 degree heat radiating
Fog bulbs:
Plug Type: 9145/9140/H10
Voltage: DC10- 24V
Colour: 6000K/ White
Lifespan: >100, 000 hrs
Light Color: White
Plug Type: 9145/9140/H10
Voltage: DC10- 24V
Colour: 6000K/ White
Lifespan: >100, 000 hrs
Light Color: White
Description:
This new product has high luminous efficiency, low power consumption and long service life.
Easy installation, Direct plug in and play.
Faster on/ off response time
Energy saving, environmental protection, Stable performance, through strict test, Use safer driving
Package Included:
2x LED High beam headlight bulb
2x LED Low beam headlight bulb
2x LED Fog light bulb
2x LED High beam headlight bulb
2x LED Low beam headlight bulb
2x LED Fog light bulb
New and old packaging will be shipped randomly
WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
🚗 【Contact us】
If you have any questions or concerns about your eBay order, please feel free to email us. We will try our best to reply all e-mails within 24 hours. However, no emails will be replied during weekends or holidays. Please allow up to 48 hours delay in receiving our response after long weekends or holidays(Except Chinese Holidays).
If you have any questions or concerns about your eBay order, please feel free to email us. We will try our best to reply all e-mails within 24 hours. However, no emails will be replied during weekends or holidays. Please allow up to 48 hours delay in receiving our response after long weekends or holidays(Except Chinese Holidays).
Please contact us for resolutions before leaving negative feedback, we strive to providing the greatest service and bringing the highest satisfaction to all of our customers.