If your vehicle requires 2" spacers but you purchased ≤1" , the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.
Specification：
Thickness：1" / 25.4mm
Vehicle Bolt Pattern：6x5.5" / 6x139.7mm
Wheel Bolt Pattern：6x5.5" / 6x139.7mm
Thread Size：14x1.5 Studs
Center Bore：108mm /4.25inch
Lug Patterns: 6 lugs
Quantity：(4) Wheel Spacers
Thickness：1" / 25.4mm
Vehicle Bolt Pattern：6x5.5" / 6x139.7mm
Wheel Bolt Pattern：6x5.5" / 6x139.7mm
Thread Size：14x1.5 Studs
Center Bore：108mm /4.25inch
Lug Patterns: 6 lugs
Quantity：(4) Wheel Spacers
Color：Black
Fits Models w/ 14X1.5 Threads Only
Fitment:
Fits Chevrolet
Fits 2007-2013 Chevrolet Avalanche
Fits 2002-2006 Chevrolet Avalanche 1500
Fits 1992-1994 Chevrolet Blazer
Fits 1988-2000 Chevrolet C2500
Fits 2003-2014 Chevrolet Express 1500
Fits 1996-2021 Chevrolet Express 2500
Fits 1999-2021 Chevrolet Silverado 1500
Fits 1988-1999 Chevrolet K1500
Fits 2015-2021 Chevrolet Suburban
Fits 2000-2014 Chevrolet Suburban 1500
Fits 1995-2021 Chevrolet Tahoe
Fits GMC
Fits 2003-2014 GMC Savana 1500
Fits 2007-2021 GMC Sierra 1500
Fits 2019-2020 GMC Yukon
Fits 2015-2020 GMC Yukon XL
Fits Cadillac
Fits 1999-2021 Escalade
Package
4 Pcs Wheel Spacers
1 pair Gloves
1 x Steel Wire Ball
4 Pcs Wheel Spacers
1 pair Gloves
1 x Steel Wire Ball
[Important Notes]
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
-- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.
-- For 1 inch or less or special adapters,
-- For 2 inches or more or special adapters,
If your vehicle requires 1" spacers but you purchased ≥2", the stock studs are shorter to hold the spacer safely, you need to exchange to small size adapters or purchase longer studs yourself.
What should I pay attention to during installation?
1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.
2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.
3) DO NOT proceed if both of the wheel spacer do not fit.
4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.
5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).
6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.
8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.
