Fitment Type: Direct Replacement
Installation Instructions: Not included
Brand: Unbranded
Other Part Number: 9520080JA0 , 95200-80JA0 , 9520080JA1 , 95200-80J
Superseded Part Number: 16002385, 95200-80JA2 , 9520180JA0 , 95201-80JA0 ,
Part Type：A/C COMPRESSOR
Pulley：5 Groove
OIL OZ：6oz
Oil Type：Pag 46
Voltage：12v
Interchange Part Number: 95201-80JA1 , 9520180JA2 , 95201-80JA2, 60-02385 NA , 60-02385NA , 16002385-101
100% brand new and high quality,Durable.
It could correctly replace the original quality part.
【Vehicle Fitment】- 【Vehicle Fitment】- This superior A/C compressor is designed for direct fitment of 2007 - 2009 Suzuki SX4 All Models
Note:
Professional Installation Is Highly Recommended
Please make sure it will fit your machine before purchasing it.
Please check pictures for more details.
The compressor may contain PAG oil for lubrication during shipping; please drain and replace
Warranty:
We keep our promises that we will provide you with the best solution within 24 hours.
Fits (For the reference):
The Compatibility Is Just For Reference. Please Compare With Your Original One Before Purchasing!
OEM Part Number:
95200-80JA2, 9520180JA0 ; 95201-80JA0, 9520180JA1 ; 95201-80JA1, 9520180JA2 ; 95201-80JA2
Package includes:
INSTALLING THE NEW or REMANUFACTURED A/C COMPRESSOR
1. Once the old compressor has been removed, begin by removing the receiver/ or accumulator, and the expansion valve or orifice tube from the vehicle.
2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.
Flush evaporators from inlet to outlet.
Flush condensers from outlet to inlet.
3. Add oil to your system.
4. Install the new receiver or accumulator, and new expansion valve or orifice tube.
5. Next, install the new or remanufactured A/C Compressor.
6. Install and tighten the A/C Compressor mounting bolts.
7. Reconnect any electrical connectors to the A/C Compressor.
8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.
9. Reconnect the negative battery cable.
10. Evacuate the A/C system with an A/C servicing machine for at least one hour.
11. Check the system for leaks.
12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system.
13. Start the vehicle’s engine and turn on the A/C system.
Make sure the windows and doors of the vehicle are open.
Should you have any questions regarding the installation of your new or remanufactured compressor, please do not hesitate to contact us.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
