Although structurally sound this frame is in very poor cosmetic condition, marks, scratches, extreme cable rub, paint chips, general paint paint failure, the decals are laqurered in but have still managed to come away on the majority, please view all the photos for reference. Structurally full working order, everything's straight, all the threads are good except the lower mudguard fixing point by the bb shell; bolt sheared off, a problem if you need to fit mudguards, tricky to drill out but not impossible.

Italian threaded bottom bracket shell, comes with a budget headset which works but of questionable quality, 1' steerer with 1-1/8" shim fitted, 100/130 O.L.D. 27.2mm seat tube ID, narrow tyre clearance. No cracks or structural damage, the tubing around the bottle cage rivnuts bows out slightly, it's the same on both fixing points on both sides so just a manufacturering quirk, no dents but two very minor dinks, only visible when sighting down the tubing, ran out of photos, extremely insufficient but worth mentioning. Ready to build or a nice restoration project, definitely worthy of a second life.

Geometry:

Seat tube (centre of BB shell to top of seat tube): 52cm.

Top tube (center of seat tube to centre of head tube): 53cm.

Down tube (centre of BB shell to centre of head tube): 61cm.

Seat stay (centre of dropout to centre of seat tube): 49cm.

Chainstay (centre of dropout to centre of BB shell): 42cm.

Headtube: 9.5cm.

Top of steerer to centre of fork dropout: 58cm