Designed to capture the true voice of any instrument, the DPA 4099 CORE+ Loud SPL handles up to 145 dB SPL before clipping, so you can slap it on a snare, a mandolin, or a screamin' Marshall with full confidence even though the 199-S configuration version is intended for saxophone, just sayin'.

With DPA’s CORE+ technology on board, it hears the detail, depth, and nuance of each performance and offers an organic translation free from exaggeration or masking. The supercardioid pickup pattern keeps bleed under control, even in cramped stage setups, while maintaining a natural sound that doesn’t fight the mix. Equally adept in stage or studio environments, the 4099 focuses on the music, not the noise.

The 4099’s discreet build and upgraded shock mount design help keep handling noise and rumble at bay, even during spirited performances. It mounts with an extensive family of flexible clips (sold separately) that are strong enough to stay put, but gentle enough to avoid leaving marks, your cello will thank you. Each clip is tailored to specific instruments, making setup fast, secure, and repeatable whether you're switching between violins or toms. The MicroLock® connector keeps your cable secure, whether you're hardwired or roaming wireless, and its IP58 rating adds extra peace of mind for real-world use. One mic can handle an orchestra's worth of instruments without needing to call in backup, a rare feat in the world of live sound.

DPA 4099-DP-1-199-S Includes

• 1 x 4099 CORE+ Instrument Microphone
• 1 x Gooseneck Lock
• 1 x DAD9001 MicroLock to 3-pin XLR Adapter with Belt Clip (or 1 x DAD9099 MicroLock to XLR with Low Cut for -G, -S,-T and -V variants)
• 1 x Microphone Clip for the respective instrument
• 1 x CM1618B90 MicroLock Extension Cable, 1.6 mm, 1.8 m (5.9 ft), Black (or 1 x CM2218B90 MicroLock Extension Cable, 2.2 mm for -B, -C and -D variants)
• 1 x zip pouch 1 x zip case

DPA 4099-DP-1-199-S Features

• Handles up to 145 dB SPL before clipping—ideal for high-output instruments like snare drums, brass, or overdriven amps
• CORE+ technology delivers natural, uncolored sound with exceptional detail and nuance
• Supercardioid polar pattern minimizes bleed and isolates the source, even in tight stage setups
• Discreet, lightweight design blends into performances without drawing attention
• Enhanced shock mount reduces handling noise and stage rumble for a cleaner signal
• Compatible with a wide range of flexible, instrument-specific clips (sold separately) that stay secure without damaging your gear
• MicroLock® connector ensures a reliable cable connection whether using wired or wireless setups
• IP58 certification means it’s built to withstand the rigors of real-world use, from clubs to concert halls
• Wide dynamic range and superior gain before feedback make it a dependable choice in demanding environments
• One mic model covers a broad range of acoustic instruments, reducing the need for multiple specialized mics

DPA 4099-DP-1-199-S Specifications

• Directional pattern: Supercardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range ±2 dB, at 20 cm (7.9 in): 80 Hz - 17 kHz with 2 dB soft boost at 10-12 kHz
• Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))
• Distortion, THD< 0.5%: 135 dB SPL RMS, 138 dB SPL peak
• Distortion, THD< 1%: 138 dB SPL RMS, 141 dB SPL peak
• Dynamic range: Typ. 118 dB
• Max. SPL, THD 10%: 145 dB SPL peak
• Rated output impedance: From MicroLock: 30 - 40 Ω. From DAD9099 or DAD9001: 100 Ω
• Cable drive capability: Up to 300 m (984 ft) with DAD9001/DAD9099 XLR Adapter
• Output balance principle: Signal balanced with DAD9099 or DAD9001 XLR Adapter
• Common mode rejection ratio (CMRR): >60 dB from 50 Hz to 15 kHz with DAD9099 or DAD9001 XLR Adapter
• Power supply (for full performance): For wireless systems Min. 5 V - max. 10 V through DPA adapter With DAD9001 or DAD9099: P48 (Phantom Power). Will work from 12 V
• Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD9099 or DAD9001 XLR Adapter
• Connector: MicroLock
• Weight: Microphone 18 g (0.63 oz)
• Instrument Microphone Clip for Sax and Trumpet (STC4099): 7 g (0.25 oz)
• Microphone diameter: 5.7 mm (0.22 in)
• Microphone length: 50 mm (1.97 in)
• Cable length: 1.8 m (5.9 ft)
• Cable diameter: 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
• Polarity: +V at MicroLock pin for positive sound pressure (and pin 2 on DAD9099 or DAD9001 XLR adapter)
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%
• Gooseneck length: 140 mm (5.5 in)
• Sensitivity selection tolerance (at 1 kHz): ±1 dB
• Colors: Black