Description
70MHz-6GHz Zynq7020+AD9361 SDR Software Defined Radio Development Board with CNC Shell for Pluto SDR MATLAB
Differences:
- AD9363 BBCZ bandwidth: 20MHz
- AD9361 BBCZ bandwidth: 56MHZ
Features:
- AD9361 chip, with frequency range of 70MHz~6GHz. Current laboratory tests show that there is not significant differences between these two chips.
- Board size: about 5 x 8cm
- Peripheral: double DDR, 1GB
- For N25Q128 FLASH, can be used to start.
- One channel SD card, can be used to start.
- Integrated FT2232 debugger, with serial port.
- PS end USB2.0.
- PS end gigabit Ethernet port.
- PL end with crystal oscillator, can drive AD9363 with pure PL.
- Support external input of local oscillator.
Supported Software:
- For IIO Oscilloscope, SDR Sharp, GNU Radio, MATLAB, and other software that support for libiio.
Key Parameters:
- RFIC: AD9361BBCZ/AD80305BBCZ
- Processor: XC7Z020-2CLG400I
- LO frequency: 70MHz - 6GHz
- BW: 200K - 20MHz
- PA: PGA102+ (10dB gain, bypassable)
- RF interface: 2T2R
- DDR3: 1GB
- Flash: 16MB
- 1000/100/10M ETH: One (PS)
- UART + JTAG: One (Type-C)
- USB2.0: One (Type-C)
- SD card slots: one
- Extend IO: 1.8V IOx8, 3.3V IOx4
- PTT out: one (5V level)
- RFIC clock: 0.5ppm TCXO/FPGA/IPEX (default TCXO)
- Size: 88 x 62 x 22mm (CNC)
- Power supply mode: USB/JTAG/XH2.54
Package Included:
- 1 x SDR Development Board (with CNC Shell)
- 1 x SD Card (Compatible Pluto firmware installed)
- 1 x Antenna
- 1 x USB-C Cable
Note:
- Please contact our customer service for firmware resources and routines after receiving the product.
Differences:
- AD9363 BBCZ bandwidth: 20MHz
- AD9361 BBCZ bandwidth: 56MHZ
Features:
- AD9361 chip, with frequency range of 70MHz~6GHz. Current laboratory tests show that there is not significant differences between these two chips.
- Board size: about 5 x 8cm
- Peripheral: double DDR, 1GB
- For N25Q128 FLASH, can be used to start.
- One channel SD card, can be used to start.
- Integrated FT2232 debugger, with serial port.
- PS end USB2.0.
- PS end gigabit Ethernet port.
- PL end with crystal oscillator, can drive AD9363 with pure PL.
- Support external input of local oscillator.
Supported Software:
- For IIO Oscilloscope, SDR Sharp, GNU Radio, MATLAB, and other software that support for libiio.
Key Parameters:
- RFIC: AD9361BBCZ/AD80305BBCZ
- Processor: XC7Z020-2CLG400I
- LO frequency: 70MHz - 6GHz
- BW: 200K - 20MHz
- PA: PGA102+ (10dB gain, bypassable)
- RF interface: 2T2R
- DDR3: 1GB
- Flash: 16MB
- 1000/100/10M ETH: One (PS)
- UART + JTAG: One (Type-C)
- USB2.0: One (Type-C)
- SD card slots: one
- Extend IO: 1.8V IOx8, 3.3V IOx4
- PTT out: one (5V level)
- RFIC clock: 0.5ppm TCXO/FPGA/IPEX (default TCXO)
- Size: 88 x 62 x 22mm (CNC)
- Power supply mode: USB/JTAG/XH2.54
Package Included:
- 1 x SDR Development Board (with CNC Shell)
- 1 x SD Card (Compatible Pluto firmware installed)
- 1 x Antenna
- 1 x USB-C Cable
Note:
- Please contact our customer service for firmware resources and routines after receiving the product.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Sep 26, 2025 at 04:39:47 PDT, seller added the following information: