Item Features
Easy to install and direct replacement.
Stable characteristics, high reliability
A Perfect Aftermarket Replacement
Manufactured with premium materials to withstand the elements and ensure proper function
Sealed connections to prevent environmental corrosion and performance issues
High quality construction for durability
Installation Steps
- Disconnect the Battery.Remove the disarm plug for the main battery pack on hybrid vehicles as well.
- Clear Access to the Sensor.This crank sensor is located behind the starter motor, which must be removed to access the sensor.
- Inspect the Sensor Location.Because of the transmission cooling lines, this sensor is difficult to notice, although it is located on the side of the block with the electrical connector attached.
- Release the Electrical Connector.A plastic clip will hold an electrical hookup to the sensor, which you must push down or pull outward to disengage.
- Remove the Sensor Mount Bolt.The majority of crankshaft sensors only have one mounting bolt, which is usually a 10mm bolt.
- Remove the Sensor.To push the sensor mounting tab away, insert a small pick or a regular screwdriver beneath it.
- Match the New Crankshaft Sensor.Wipe away any grease from the old sensor so you can notice any design differences in the new sensor.
- Installing the New Crank Position Sensor.Clean the position sensor porthole with a shop towel before inserting the new sensor to ensure a proper seal to the new sensor O ring.
- Reconnect the Battery.When you're done, take the car off the jack stands and rejoin the negative battery cable, and you're ready to go.
Symptoms of a Failing Crankshaft Position Sensor
- Issues Starting the Vehicle.
- Intermittent Stalling.
- Check Engine Light Comes On.
- Uneven Acceleration.
- Engine Misfires or Vibrates.
- Rough Idle and/or Vibrating Engine.
- Reduced Gas Mileage.
Fit for
Chrysler Sebring 2007-2010 2.4L 2360CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Chrysler 200 2011-2014 2.4L 2360CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Dodge Viper 2005-2006 8.3L 8275CC 505Cu. In. V10 GAS OHV Naturally Aspirated
Dodge Viper 2005 8.3L 8277CC 505Cu. In. V10 GAS DOHC Naturally Aspirated
Dodge Ram 1500 2005-2006 8.3L 8275CC 505Cu. In. V10 GAS OHV Naturally Aspirated
Dodge Viper 2006 8.3L 8277CC 505Cu. In. V10 GAS OHV Naturally Aspirated
Dodge Caliber 2007-2009 1.8L 1798CC 110Cu. In. l4 GAS DOHC Naturally Aspirated
Dodge Caliber 2007-2011 2.4L 2360CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Dodge Caliber 2007-2012 2.0L 1998CC 122Cu. In. l4 GAS DOHC Naturally Aspirated
Dodge Caliber 2008-2009 2.4L 2360CC 144Cu. In. l4 GAS DOHC Turbocharged
Dodge Viper 2008 8.4L 8382CC 512Cu. In. V10 GAS OHV Naturally Aspirated
Dodge Avenger 2008-2014 2.4L 2360CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Dodge Viper 2008-2010 8.4L 8448CC 515Cu. In. V10 GAS OHV Naturally Aspirated
Dodge Journey 2009-2014 2.4L 2360CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Jeep Patriot 2007-2014 2.0L 1998CC 122Cu. In. l4 GAS DOHC Naturally Aspirated
Jeep Compass 2007-2014 2.4L 2360CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Jeep Compass 2007-2014 2.0L 1998CC 122Cu. In. l4 GAS DOHC Naturally Aspirated
Jeep Patriot 2007-2014 2.4L 2360CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
SRT Viper 2013-2014 8.4L 8448CC 515Cu. In. V10 GAS OHV Naturally Aspirated
Note
Check and replace sensors regularly to prevent accidents
If you have any questions about the product, please do not hesitate to contact us.
Our products are high quality aftermarket parts that can replace the original parts of your car.
Please understand that the color of the product in the photo may be a little different from the real product due to the lighting problem.
Please refer to the listing pictures for an accurate description of the parts included in the kit