|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fit for:
Toyota HILUX - VZN167R - 11/2002 to 04/2005 - 3.4L 5VZ-FE 6 cylinder MPFi 24v (132kw) DOHC
Toyota HILUX - VZN172R - 11/2002 to 04/2005 - 3.4L 5VZ-FE 6 cylinder MPFi 24v (132kw) DOHC
Toyota PRADO- VZJ95R - 06/1996 to 2005 - 3.4L 5VZ-FE 6 cylinder MPFi 24v (132kw) DOHC
Specifications:
OE Numbers:
19037-62010 & 90919-02212
Product Material: Metal+Plastic
Colour: Black
CAUTION: Before starting the installation, please Disconnect the Negative Terminal of the Battery to prevent short-circuiting.
Package Weight: 1,230 g
Package Sizes (cm): 25 x 23 x 12
Features：
*Perfect Adaptability
Manufactured in accordance with the specifications of the adapted parts for a perfect fit.
*High Quality
Made of high quality material with voltage resistance, aging resistance, heat shock resistance, etc., it can withstand high temperature working environment for a long time.
*Safety & Durability
Using high conductive copper wire and high dielectric performance epoxy resin to ensure that there is no dead space in the potting, avoiding air bubbles, slits, etc. to cause voltage breakdown.
*Excellent Ignition Performance
This ignition coil is able to ignite successfully under different working conditions, featuring high ignition energy, long spark duration, and good low-temperature starting.
*Stable Performance
Uniform colour of the coil, no impurity black spot. It has even resistance value and good consistency, allowing it to work stably.
INSTALLATION NOTES
Before Installation:
1. Disconnect the power supply
Before starting the installation, make sure you have disconnected the negative terminal of the vehicle's battery to prevent unintended passage of current and avoid the risk of electric shock or short circuit.
2. Clean the installation location
Before installing a new ignition coil, clean the ignition coil holder and the area around it to ensure that there is no dust, oil or other contaminants that could affect the contact quality.
3. Check the spark plug
Check the condition of the spark plugs before installing a new ignition coil. If the spark plugs are worn or have reached their replacement cycle, it is recommended that they be replaced at the same time to ensure optimum performance of the ignition system.
When Installing:
4. Correct torque
When installing the ignition coil, it is important to use the correct torque to hold it in place. Over-tightening may damage the ignition coil or mount, while over-loosening may result in poor contact or looseness.
5. Connection check
Ensure that the electrical connections to the ignition coil are secure and not corroded. After installation, check that all connections are correct and that the ignition coil and associated cables have not been pulled or twisted.
6. Replacement one by one
If more than one ignition coil is being replaced, it is recommended that they be replaced one at a time to avoid confusing the ignition sequence or electrical connections.
After Installation:
7. Check for error codes
After installation, please start the engine and check whether any error codes appear. If any error lights come on or if any abnormalities are found in the ignition system, further inspection and diagnosis should be carried out immediately.
Packaging Include:
3 x Ignition Leads
3 x Ignition Coil Pack
| Item Specifics | |
|---|---|
| Brand | AUXITO |
| Type | Ignition Coil |
| Warranty | 5 Year |
| Year | 07/1996-02/2003 |
| Chassis Prefix | VZJ95R |
| Ignition Coil | IC70637 x3 - OEM : 90919-02212 |
| Manufacturer Part Number | PI-TYN819 |
| Kit or Single Part | Kit |
| Ignition Leads | PI-TYN819 - NGK Equiv - RC-TYN819 |
| Make And Model | For Toyota PRADO |
| Engine | 5VZ-FE 5VZ 4cyl 24V DOHC 3.4 Litre (124kw) |
| Placement on Vehicle | Front |
| Reference OE/OEM Number | 19037-62010,90919-02212,1903762010,9091902212 |
| Coil Type | Ignition Coil Pack |
| Classic Car Part | Yes |
| Country/Region of Manufacture | China |
| Finish | Brushed |
| Interchange Part Number | 19037-62010,90919-02212,1903762010,9091902212 |
| Manufacturer Warranty | 5 Years |
| Mileage | 50,000-74,999 miles |
| Performance Part | Yes |
| Universal Fitment | No |
-We gladly accepts payment via PayPal, should be received within 3 days from the date of purchase.
-Before payment,Please keep the consistency of Paypal address and ebay address.
-Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account
-Quantity orders are welcome!
-All items will be shipped in 1 business days via Australia Post after receiving your payment .
-We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.
-All returned items should be in the original packaging , return tracking information should be provided ..
-Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .
-Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.
-We maintain high standards of excellenceand 
strive for 100% customer satisfaction! 
Feedback is very important to us. We request that you contact us immediately Before you give us neutral 
or negative 
feedback, so that we can satisfactorily address your concerns.
[Our office hours are MONDAY - Saturday 9:00PM - 6:00PM PST, but we will response you once we get your message .There will be some delay on respons if you send message or E-Mail on Sundy.]
For TOYOTA Hilux & Prado 5VZ-FE V6 3.4L 96-2005 IGNITION LEAD & COIL PACK KIT
Fit for: Toyota HILUX - VZN167R - 11/2002 to 04/2005 - 3.4L 5VZ-FE 6 cylinder MPFi 24v (132kw) DOHC Toyota HILUX - VZN172R - 11/2002 to 04/2005 - 3.4L 5VZ-FE 6 cylinder MPFi 24v (132kw) DOHC Toyota PRADO- VZJ95R - 06/1996 to 2005 - 3.4L 5VZ-FE 6 cylinder MPFi 24v (132kw) DOHC
Specifications: OE Numbers: 19037-62010 & 90919-02212 Product Material: Metal+Plastic Colour: Black CAUTION: Before starting the installation, please Disconnect the Negative Terminal of the Battery to prevent short-circuiting. Package Weight: 1,230 g Package Sizes (cm): 25 x 23 x 12
Features： *Perfect Adaptability Manufactured in accordance with the specifications of the adapted parts for a perfect fit. *High Quality Made of high quality material with voltage resistance, aging resistance, heat shock resistance, etc., it can withstand high temperature working environment for a long time. *Safety & Durability Using high conductive copper wire and high dielectric performance epoxy resin to ensure that there is no dead space in the potting, avoiding air bubbles, slits, etc. to cause voltage breakdown. *Excellent Ignition Performance This ignition coil is able to ignite successfully under different working conditions, featuring high ignition energy, long spark duration, and good low-temperature starting. *Stable Performance Uniform colour of the coil, no impurity black spot. It has even resistance value and good consistency, allowing it to work stably.
INSTALLATION NOTES Before Installation: 1. Disconnect the power supply Before starting the installation, make sure you have disconnected the negative terminal of the vehicle's battery to prevent unintended passage of current and avoid the risk of electric shock or short circuit. 2. Clean the installation location Before installing a new ignition coil, clean the ignition coil holder and the area around it to ensure that there is no dust, oil or other contaminants that could affect the contact quality. 3. Check the spark plug Check the condition of the spark plugs before installing a new ignition coil. If the spark plugs are worn or have reached their replacement cycle, it is recommended that they be replaced at the same time to ensure optimum performance of the ignition system.
When Installing: 4. Correct torque When installing the ignition coil, it is important to use the correct torque to hold it in place. Over-tightening may damage the ignition coil or mount, while over-loosening may result in poor contact or looseness. 5. Connection check Ensure that the electrical connections to the ignition coil are secure and not corroded. After installation, check that all connections are correct and that the ignition coil and associated cables have not been pulled or twisted. 6. Replacement one by one If more than one ignition coil is being replaced, it is recommended that they be replaced one at a time to avoid confusing the ignition sequence or electrical connections.
After Installation: 7. Check for error codes After installation, please start the engine and check whether any error codes appear. If any error lights come on or if any abnormalities are found in the ignition system, further inspection and diagnosis should be carried out immediately.
Packaging Include: 3 x Ignition Leads 3 x Ignition Coil Pack
Payment
-We gladly accepts payment via PayPal, should be received within 3 days from the date of purchase. -Before payment,Please keep the consistency of Paypal address and ebay address. -Payment should be made within 4 days once you won a item ,or ebay will launch Unpaid Reminder agaist you and there will be bad record on your ebay account -Quantity orders are welcome! Shipping
-All items will be shipped in 1 business days via Australia Post after receiving your payment . Returns
-We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package. -All returned items should be in the original packaging , return tracking information should be provided .. -Buyer is responsible for return shipping cost due to the problem not caused by item quality itself . Contact Us
-Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues. -We maintain high standards of excellenceand [Our office hours are MONDAY - Saturday 9:00PM - 6:00PM PST, but we will response you once we get your message .There will be some delay on respons if you send message or E-Mail on Sundy.] All rights reserved. |
||||||||||||||||||||||||||||||||||||||||||||||
On 09/06/2026 at 11:15:16 AEST, seller added the following information: