Intercooler Aluminum Heat Exchanger For Air to Water 34x13.5x2.25" Supercharger
Radiator Configuration:
Core Size:  31.5"  x 13.3" x 2
Overall Size: 34"  x 13.5" x 2.25"
Upper Inlet:  0.75"
Lower Outlet: 0.75"
Transmission Oil Cooler: Not Included

NOTE: We have warehouses in CA, NJ, GA which can guarantee the fast delivery to any city in United States

How to replace a new radiator

Step 1: Disconnect the battery before proceeding,make sure the car, engine, and coolant are NOT hot!
Step 2: Examine the radiator (or overflow) cap and check the belts and hoses for damaged,
Step 3: Open the petcock valve or remove the bottom radiator hose to drain the coolant. Drain the coolant into a plastic reservoir. 
Step 4: With the coolant drained, start removing hoses, clamps and the radiator bolts keeping the radiator in place. 
Step 5: With all the hoses, bolts, and lines removed, you should be able to remove the radiator from the vehicle.
Step 6: Set the new radiator in place, and then reattach all the previously removed parts. 
Step 7: Check that the petcock is closed and that all other valves and caps on the new radiator are shut. 
Step 8: Trapped air in the cooling system,and recheck the coolant level in the reservoir (overflow) tank after the job is completed