The CT 200 is an injector cleaner and tester machine that combines ultrasonic cleaning technology with oil pressure control cleaning and inspection technology. It can simulate various working conditions of the engine to clean and test the injectors. It can support 6-cylinder injectors at the same time, saving time, and efficiency. Also supports testing of fuel injectors for most cars and motorcycles in the market. Since its launch, AUTOOL CT200 model has been widely received and approved by professional auto repair technicians. Features: ➤ 1.【Why Need It】The performance of the injector plays a vital role in the power of each engine. Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder; accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector. Cause damage to the engine, so the injector should be cleaned regularly. ➤ 2.【Digital Display】With the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values. ➤ 3.【Automatic Cleaning and Testing】Fuel pressure control through microcomputer offers stable pressure control and largeadjustable range, which is suitable for all EGI vehicles and can help to achieve automatic cleaning and testing of injectors. ➤ 4.【Adopting Humanization Design】Automatic fuel draining through preset programs for some test items. Test liquid/detergent can also be drained by pushing a button on the control panel after the test.can make the system pressure fast restored to the default,The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle. ➤ 5.【Reverse Flush】Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector,and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush. ➤ 6.【Three Years Warranty and Lifelong Maintenance】For the damage caused by non-human factors, AUTOOL promises to resend the parts for free within 3 years. For any demand, we warmly welcome you to contact us, and we will reply you as soon as possible within 24 hours.

Ultrasonic Cleaning  The strong shaking produced by ultrasonic waves can quickly strip off the carbon deposits to achieve the effect of comprehensive cleaning of the injector.

12 Functions Available Ultrasonic Cleaning Idling Test (0~20ms) Medium Speed Test (0-7.5ms) High Speed Test (0-4ms)  Accelerating Test Shifting Speed Test Leak Checking Test ldling Spray Value Test Medium Speed Spray Value Test High Speed Spray Value Test Reverse Flushing No-disassembly Cleaning

6-Cylinder Design  This tool can clean and test up to six fuel injectors simultaneously,providing efficient service. It allows for easy observation and accurate evaluation of the injectors' condition through comparison

1.Pour in the detergent and place the fuel injector in the ultr asonic cle aner.

2.Connect the pulse signal wire &se lect the ultrasonic cle aning function to start working.

1.Pour in the test liquid, install the fuel injector to the fuel distributor and fix it to the main unit by bolts.

2.Test if the fuel injector is leaking or blocked under different functions.

About the cleaning liquid and testing liquid: 1.What liquid I can use for the checking ? Test liquid:Inedible alcohol. 2. What liquid for the cleaning mode of this machine? Special injector cleaning liquid,such as 3M injector cleaning liquid.

Specifications

Fuel Tank Capacity: 2000 ml

Capacity of Measuring Cylinder: 125 ml

Speed Range: 0~7500 rpm

Injecting Times: 0~9900 seconds Step: 10rpm

PWM Pulse: 0~20.0 ms Step: 0.1 ms

System Pressure: 0~0.6Mpa (adjustable)

Time: 0~20 minute (adjustable)

Power of Ultrasonic Cleaning: 100W

Frequency of Ultrasonic Cleaning: 28 KHZ±0.5 KHZ

Power supply: AC110V±10%

Frequency: 50HZ±0.5

Humidity: ＜85%

Environment Temperature: 0℃～＋40℃

Magnetic Field: ＜400Ａ/m

Packing List: 1pc * AUTOOL CT200 Fuel Injector Cleaner Tester Main Unit;1pc * Funnel(for adding test fluid);1pc * Ultrasonic Cleaning Bracket(for placing the injectors during cleaning); 2pcs * Drain Valves(For recovering the cleaning and test fluid );2pcs * Fixing rods(For fixing the oil separator);2pcs * Fixing Nuts(For fixing the oil separator); 6pcs* Reverse flush connectors φ15.8mm(for connecting the bottom of the injector and the oil separator hole)6pcs * Conical top inlet connectors φ10.5mm&13.6mm (for connecting the top of the injector and the oil separator hole);6pcs *Adapter cables(For transferring the pulse signal line connector, instead of connecting the injector signal input pin);1pc * Power Cable(for connecting power supply);1pc * Oil Separator(Distribution device for outputting pressurized test fluid to the injectors);6pcs* Special injector gaskets(for auxiliary installation of special fuel injectors);5pcs * Special plugs for oil separator(used to block the holes on the oil separator);1pc * Ultrasonic Cleaning Cover(for keeping the cleaning bath clean);1pc * User Manual(Instructions)