|
|
|
|
|
|
|
|
|
|
Application
Note: Adapters does NOT work for stock/ orginal rims, for 6 Lug Vehicle with 5 Lug Wheels
- For Cadillac Escalade 1999-2025
- For Cadillac Escalade ESV 2023-2025
- For Chevrolet Avalanche 1500 2002-2006
- For Chevrolet Avalanche 2007-2013
- For Chevrolet Blazer 1992-1994 (6 Lug Vehicles)
- For Chevrolet C2500 1988-2000 (6 Lug Vehicles)
- For Chevrolet Express 1500 2003-2014
- For Chevrolet K1500 1988-1999
- For Chevrolet K1500 Suburban 1992-1999
- For Chevrolet K2500 1988-2000 (6 Lug Vehicles)
- For Chevrolet Silverado 1500 1999-2025
- For Chevrolet Suburban 2015-2025
- For Chevrolet Suburban 1500 2000-2014
- For Chevrolet Tahoe 1995-2025 (1995-2000 4WD 6 Lug Only)
- For GMC C2500 1988-2000 (6 Lug Vehicles)
- For GMC K1500 1988-1999
- For GMC K1500 Suburban 1992-1999
- For GMC K2500 1988-2000 (6 Lug Vehicles)
- For GMC Savana 1500 2003-2014
- For GMC Sierra 1500 1999-2025
- For GMC Yukon 1992-2025 (1992-1999 4WD 6 Lug Only)
- For GMC Yukon XL 2015-2025
- For GMC Yukon XL 1500 2000-2014
- For Ram 1500 2019-2025
Description
- Spacer Thickness: 2 inch or 51 mm
- Vehicle bolt pattern: 6x5.5 inch or 6x139.7 mm
- Wheel bolt pattern: 5x5.5 inch or 5x139.7 mm
- Center Bore Size: 108 mm
- Thread Size: 14x1.5
- Torqued Down By Hand At: 85-90 FT/LBS
- Fitment Note:For 6 Lug 6x5.5 Vehicle with 5 Lug 5x5.5 Wheels
Installation
- Loosen the Lug Nuts
Common mistake: the first step should be loosening the lug nuts rather than jacking up the vehicle. That’s because you cannot get enough torque on a wheel suspended in the air. So make sure loosening all the wheel lug nuts in turn with a spanner before jacking up the vehicle.
Notification: Just Loosen them, there is no need to unscrew them completely.
- Jack up the Vehicle, Remove the Wheels
Jack up and support the vehicle on the Jack stand, then remove the jack. Finally, remove all nuts and take away the wheels.
- Clean up the Hub
Clean gunk wire brush, put some Loctite on the hub and thread pitch. Avoid collision to the main part and install the wheel spacers to the vehicle.
- Installing the Wheel Spacers
Install the wheel spacers, but use the supplied lug nuts instead of the stock lug nuts. Place the wheel spacer on the studs of the hub. Make sure the studs of wheel spacers face outwards. Later, install the supplied lug nut in a star sequence.
Notification:
- Fix thelugnuts in a diagonal/star pattern in sequence. This will ensure a reliable installation.
- Do notuse Impact Wrench during installation! It may cause damage to both the vehicle and the product!
- Please check the exact torque from theinstructions,
- To prevent loose, thread adhesive can be added during installation.
- Check the Installation
Failure to clean up may cause a gap between the wheel spacer and the hub, which may allow a vibration of vehicle while driving.
Place the spacer on the factory hub. The spacer should sit flush with the brake rotor. If there is any gap between the brake rotor and the spacer, even if it is small. Don’t use the spacer! Please be sure to check this. You shouldn’t even be able to slide a piece of paper the spacer on the factory hub.
- Reinstalling the Wheels
Install the wheels to the wheel spacers. Please note that the wheel lug nuts should be fitted in the same way as the wheel spacers lug nuts ---- tighten the lug nuts in diagonal or star sequence.
Again it is not necessary to fully fit the nuts in place for this step, just keep them for the next step.
Notification: Fix in the order in which the pentagrams are drawn. In the case of six or more holes, fix them roughly in diagonal order.
- Follow-up Inspection
Once everything is in place, drive the vehicle and check for any unusual vibration.
Re-torque all lug nuts after 50-100 miles of driving ,then again after 2000-3000 miles.
| Item Specifics | |
|---|---|
| Brand | PARTHIGH |
| Manufacturer Part Number | PART844273HIGH |
| Number of Pieces | 4 |
| Color | Black |
| Material | Aluminum |
| Features | Easy Installation, Durable, Rust-resistant Coating |
| Placement on Vehicle | Front Rear |
| Type | Wheel Adapters |
| Item Included | Spacer, Lug Bolt, Lug Nut |
| Spacer Thickness | 51mm (2 inch) |
| Vehicle Lug Quantity | 6 |
| Wheel Lug Quantity | 5 |
| Vehicle Bolt Pattern | 6x139.7mm (6x5.5 inch) |
| Wheel Bolt Pattern | 5x139.7mm (5x5.5 inch) |
| Center Bore Size | 108mm |
| Hubcentirc | No |
| Thread Pitch | M14x1.5 |
| Torqued Down By Hand At | 85-90 FT/LBS |
| Bolt Shank Length | 34mm |
| Other Part Number | 6x5.5 to 5x5.5 PCD-14x1.5 Studs-2" Thick-Wheel Adapters Spacers |
| Interchange Part Number | For 6 Lug Vehicle with 5 Lug Wheels |
(California Customers should pay more attention about it.)
We accept all ebay payment
99% of orders shipped within 24 hours.
2-8 days in transit.
Nice and strong packing.
UPS
, USPS
, fedEx
comes to be our first choice.
This item is backed by our 1-year warranty.
Refund will be given as money back or replacement
Item must be returned in original pacakge and packing the same as received.
Seller is responsible for the return if delivered item not the same as described or received damaged.
If you have a question about the item you should contact us before bidding.
Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).
Our Customer Service Team is always online to answer.
Shop Category Hot Item
New List Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
For Ram 1500 6x5.5 Convert to 5x5.5 Wheels (4) 2" Thick Wheel Adapters 14x1.5
Application Note: Adapters does NOT work for stock/ orginal rims, for 6 Lug Vehicle with 5 Lug Wheels
Description
Installation
Common mistake: the first step should be loosening the lug nuts rather than jacking up the vehicle. That’s because you cannot get enough torque on a wheel suspended in the air. So make sure loosening all the wheel lug nuts in turn with a spanner before jacking up the vehicle. Notification: Just Loosen them, there is no need to unscrew them completely.
Jack up and support the vehicle on the Jack stand, then remove the jack. Finally, remove all nuts and take away the wheels.
Clean gunk wire brush, put some Loctite on the hub and thread pitch. Avoid collision to the main part and install the wheel spacers to the vehicle.
Install the wheel spacers, but use the supplied lug nuts instead of the stock lug nuts. Place the wheel spacer on the studs of the hub. Make sure the studs of wheel spacers face outwards. Later, install the supplied lug nut in a star sequence. Notification:
Failure to clean up may cause a gap between the wheel spacer and the hub, which may allow a vibration of vehicle while driving. Place the spacer on the factory hub. The spacer should sit flush with the brake rotor. If there is any gap between the brake rotor and the spacer, even if it is small. Don’t use the spacer! Please be sure to check this. You shouldn’t even be able to slide a piece of paper the spacer on the factory hub.
Install the wheels to the wheel spacers. Please note that the wheel lug nuts should be fitted in the same way as the wheel spacers lug nuts ---- tighten the lug nuts in diagonal or star sequence. Again it is not necessary to fully fit the nuts in place for this step, just keep them for the next step. Notification: Fix in the order in which the pentagrams are drawn. In the case of six or more holes, fix them roughly in diagonal order.
Once everything is in place, drive the vehicle and check for any unusual vibration.
Warning
(California Customers should pay more attention about it.) Payment
We accept all ebay payment Shipping
99% of orders shipped within 24 hours. 2-8 days in transit. Nice and strong packing. UPS Return
This item is backed by our 1-year warranty. Refund will be given as money back or replacement Item must be returned in original pacakge and packing the same as received. Seller is responsible for the return if delivered item not the same as described or received damaged.
About Us
If you have a question about the item you should contact us before bidding. Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
