The advantages of flame polishing machine:

1. On-demand production, no storage, compared with bottled gas, safe and convenient.

2. Simple raw materials, only water and electricity, boot that is available, economical and practical,

good mobility, small size, can carry, but also suitable for field operations.

3. Flame concentration, suitable for precision flame processing.

4. Hydrogen Odor tasteless non-toxic, combustion products only water, do not pollute the environment.

5. Hydroxygen flame is carbon-free flame, workpiece welding fastening, no carbon crisp phenomenon.

The application of flame polishing machine:

1. Acrylic handicraft products are polished

2. Plexiglass flame polishing Experimental demonstration of hydrogen and oxygen produced by water electrolysis in large and medium-sized schools

Note:

1.polishing machine life in more than 3 years timely water, if found to indicate a significant decline in liquid level, you need to timely water (no need to add powder).

2.the current significantly reduced, the appropriate amount of electrolytic powder preparation.

3.after the first use, usually only "1,2" work, electrolyte 3 months or so found to become dirty or mixedwith excessive alcohol failure to be updated once, for the electrolyte, please put the machine inverted electrolyte , Rinse the electrolytic tank after pouring, and refill the electrolyte.

4. add water and change the water should be closed when the flame gun and power, slowly unscrew the nut plus distilled water to no more than "high scale" is not lower than the "low scale" position, tighten the nut to reboot.

5.if there is water in the hose will lead to the flame yellow, should be promptly discharged.

6.alcohol can not drink alcohol tank can not exceed the mouth, if it should be promptly unscrew the alcohol cans pour excess alcohol.

7.check the hose connection shall not leak.

8.pay attention to the electrolyte with alkaline, such as accidentally contaminated, pleaserinse with water.

9. after the boot if not deflated, the pressure indicator is about 0.1MPA, the current indicator back to zero, does not start, indicating that the machine does not leak, such as deflation, the pressure drop, the current jump back, the machine is normal.

10. such as the phenomenon of tempering implosion, do not panic worry, improper operation, leak or spray gun failure, check the gas pipeline or replace the gun.

H260 150L/h Flame polishing machine acrylic polishing machine crystal - word polishing machine 220V/110V