Package include:

2x-Wheel Adapters

Specification：

Wheel bolt pattern: 5x4.5" (5x114.3mm)

Vehicle bolt pattern: 4x4.5" (4x114.3mm)

Thread Size: M12x1.25 or 12x1.25 or 12MMx1.25

Spacer Thickness:1" or 1 inch or 25mm

Color: Silver

Number of Pieces: 2 PCS

Fitment：

For Infiniti:

For Infiniti G20 1991-1996

For Infiniti M30 1990-1992

For Nissan:

For Nissan 200SX 1984-1988

For Nissan 240SX 1989-1998

For Nissan 300ZX 1984-1986

For Nissan Altima 1993-2001

For Nissan Axxess 1990-1995

For Nissan Cube 2009-2014

For Nissan Maxima 1985-1988

For Nissan Sentra 2000-2012 (2007-2012 2.0L 4 Lug Only)

For Nissan Stanza 1982-1992

For Nissan Versa 2007-2012

READ BEFORE ACTION

STEP-1Vehicle bolt pattern check

Confirm your vehicle bolt pattern according to the figure below.

Let's take the 5-lug wheel spacer as an example, if the length of segment as measured in the picture is 5.5”, and as there are 5 lugs, then the bolt pattern is 5x5.5". Now you should be able to determine what kind of bolt patterns you need.

STEP-2 Measurement

Measure the diameter of the center bore of the wheel spacers, make sure that it is greater than the axle diameter.

STEP-3 Check

Check the thread size, which is often ignored by customers when placing the order.
TIPS: install the supplied lug nuts or bolts on the hub only by hand (do not install the wheel at this time). It might be the wrong thread size for your vehicle when you feel resistance during the process, and please con:act the tire seller or manufacturer for further suggestions.

Installation NOTICE:

1. Clean the studs thoroughly and remove any excessive dirt, oil, grease etc.
2. Thread the supplied lug nuts to axle studs with TAPERED end facing towards the spacers.
3. Install the nuts by hand ONLY and tighten them in a crisscross pattern.
4. Do NOT use automatic screwdrivers when installing wheel spacers.
5. It is possible that your existing lug nut studs can be longer than the adapter itself, you may need to alter your existing studs if the adapters do not sit flush with the wheels. If the studs are longer than the adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs. Otherwise, the adapter bolt can、work as normal and will -r-atlv shorten the bolt's workinq life and bring danger to you.

Maintenance TIPS

• Please check all lug nuts and bolts of the adapters after the first 50 -100 miles. They may get loose after long time running. Make sure you will recheck them every 3000 - 5000 miles and screw tight.
• For any further questions, please contact the manufacturer or seller via message of website v/here you placed the order. Thank you again for purchasing your wheel spacers with us.

Installation NOTICE:

1. Clean the studs thoroughly and remove any excessive dirt, oil, grease etc.
2. Thread the supplied lug nuts to axle studs with TAPERED end facing towards the spacers.
3. Install the nuts by hand ONLY and tighten them in a crisscross pattern.
4. Do NOT use automatic screwdrivers when installing wheel spacers.
5. It is possible that your existing lug nut studs can be longer than the adapter itself, you may need to alter your existing studs if the adapters do not sit flush with the wheels. If the studs are longer than the adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs. Otherwise, the adapter bolt can、work as normal and will -r-atlv shorten the bolt's workinq life and bring danger to you.

Maintenance TIPS

• Please check all lug nuts and bolts of the adapters after the first 50 -100 miles. They may get loose after long time running. Make sure you will recheck them every 3000 - 5000 miles and screw tight.
• For any further questions, please contact the manufacturer or seller via message of website v/here you placed the order. Thank you again for purchasing your wheel spacers with us.