Description:

       E-bike controller X098-AXC013 for use with 2HAO communication protocol instruments.

Product Specification: X098-AXC013

Model: X098-AXC013

Weight: 260g

Current: 18A

Rated voltage: 48V

Size: L117mm W52mm H32mm 

◆ Invisible soft/hard start:

Invisible soft/hard start. Step on the brake, turn the handle to the end, energize and wait for 3 seconds - soft start (default is hard start) with memory function, repeat the above operation again to switch to hard start.



◆ Invisible Single/Dual Hall Booster:

 Invisible single/double Hall booster. Apply the brake, turn on the power, turn the knob three times - Dual Hall Booster (default is Single Hall Booster) with memory, repeat the above operation again to switch.

Note: It can only match the three-wire booster sensor.


◆ Undervoltage protection:

When the battery voltage falls to the under-voltage value of the controller, the output will be stopped automatically to protect the battery in time and prevent the battery pack from being damaged due to over-discharge.


◆ Start-up anti-flying and running anti-flying:

Prevent the controller from powering on and flying due to line or turntable failure, improve the safety of vehicle use.


◆ MOS tube short circuit protection:

Automatically detects MOS tube faults when powering on, preventing other MOS tubes from being damaged by series short-circuit.


◆ High temperature protection:

When the temperature of the controller itself is too high, it will automatically reduce the output current or stop output.


◆ Rotary protection:

When the motor blocking rotation, the control cap automatically limit current, blocking rotation 2S catty cut off the circuit, timely protection of the motor and controller.