Material Polyethylene Terephthalate
Number of Items 300
Color Black
Brand PargaDeco
Item Diameter 10 Millimeters
Material Type Polyethylene Terephthalate
Manufacturer Part Number 3D maker
Item Weight 0.51 Ounces
Package Dimensions 6.3 x 3.43 x 0.43 inches
Manufacturer Chengyuguagnxue
> 3D Scanning dots with Inner diameter 6.0 mm and outer diameter 10.0 mm，Each Sheet include 50pcs Scanning Markers
> 3D scanning marker point is an indispensable auxiliary positioning tool and calibration tool in the fields of optical surveying and mapping, machine vision etc,suit for Laser 3D Scanner and White light Scanner.
> High Reflective 3D Scanner dots easy to stick on and peel back off
> 3D Tracking dots are easy to pick up and very reflective for 3D Scanner
> Accurate Tracking Dots Diffuse Reflection Markers for 3D Scanner,widely used for high-precision industrial and consumer 3D scanning, suitable for 3D scanning reverse engineering, quality control inspection Meteorology etc
> These 3D Scanning Markers compatible with 3D scanners for example Shining 3D Einstar Handheld 3D Scanner,Creaform,Peel3D,Creality and Revopoint 3D scanner etc
Product Description
About 3D Scanning dots,Scanning Markers Sticker for your 3D scanner.
A 3D scanner marker sticker, also known as a reference marker or target, is a small sticker or object that is placed on the surface of an object to be scanned using a 3D scanner. The marker sticker serves as a reference point for the scanner, allowing it to track the position and orientation of the object as it is being scanned. These good and quality markers will assist in a seamless 3d scanning process and avoid multiple times scanning. These multiple sticker markers on the object at different positions and orientations, a 3D scanner such as Einscan Creality Revopoint 3D Scanner can capture a more accurate and detailed 3D model of the object.
300pcs PargaDeco 3D Scanning dots,Scanning Markers for 3D Scanning,High Reflective 3D Scanner dots, Compatible with Einscan Creality Revopoint 3D Scanner
6mm Scanning Markers Sticker for your Scanning Specification:
Inner diameter: 6 mm
Outer diameter: 10 mm
Round, on adhesive foil as tear-off pad
50 single point markers each sheet, total 6 sheet x 50pcs= 300pcs
How to pick out which size fit your for 3D scanning ?
The size of the reference point markers depends on which 3D scanner and measuring volume is used for measuring your objects,Basically to say: the larger the item, the bigger the points have to be applied.
How to put the 3D Scanning Markers Sticker Tracking dots for 3D Scanning?
1.In order to ensure the integrity of the spliced data, there should be no less than 3 mark points at the splicing transition;
2. When labeling points, they should show a V-shaped distribution;
3. Try not to align more than two marking points on a straight line, otherwise incorrect splicing will occur;
4. The marking point should be affixed to the surface of the object as much as possible, and the marking point cannot be pressed against the edge of another marking point, or the marking point is folded, which will cause incomplete marking points;
5. Select the appropriate mark point size according to the size and characteristics of the object. If the selection is improper, the mark point will not be recognized, resulting in the phenomenon of inability to join together;
6. When pasting the marking points on the surface of the measured object, pay attention to avoiding the features of the object, and paste it on the place where the measured object has no features, such as large planes, large curved surfaces, etc
7. In general, the number of marked points has no effect on the accuracy and will not increase the recognition rate of the point cloud. Therefore, the pasted marking points should not be too many, just fit the scanning;
What will you get from this 3D Scanning dots package?
1 pack 6 sheet, Total 300 pcs
6.0mm 3D Scanning dots,Scanning Markers Sticker for your 3D scanner