Product Performance Indicators

1.Appearance: The surface should be clean, smooth, and consistent in color.

2. Adhesive strength: should not exceed 2.5mm.

3. Peel strength: should not be less than 1.0N.

Pack: 10ml/ syringe

[Scope of Application]

Used for porcelain or glaze application on ceramic restorations. During the firing process, the restorations are stabilized on sintering plates or nails to prevent them from falling off during firing. After sintering, they are promptly cleaned and removed.

Usage

Open the sealing cover, push the piston handle, extrude about 3mm spherical sintered paste, attach it to the fixed end or sintered nail of the restoration, and compact and fix the restoration

Precautions

1. The amount used each time should not be too much to avoid waste.

Sintering paste can only be strictly applied to the adhesive end of the restoration, and must not contaminate the working surface of the porcelain or glaze on the restoration.

3. The user must strictly follow the regulations for medical waste and dispose of residual products after use.

4. After use, tighten the sealing cover and store it in a dark seal. 

Shipping

Packing Detail:Each block is packed by hard carton box

Shipping way:DHL/UPS/FedEx/SpeedPAK Standard Shhipping

We will choose the most efficient and convenient express for you according to the situation of the order. You only need to take care of receiving the goods

Note: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.