Description:

Electric Bike Controller X008-AB017A for 5S communication protocol.

Product Specifications:

Model: X008-AB017A

Weight: 242g

Current: 18A

Rated Voltage: 48V

Dimensions: L98mm W64mm H33mm

Invisible Soft/Hard Start:

Invisible Soft/Hard Start. Squeeze the brake, turn the handle to the end, energize and wait for 3 seconds - soft start (default is hard start) with memory function, repeat the above operation again to switch to hard start.

Stealth Single/Dual Hall Boosters:

Stealth Single/Dual Hall Boosters. Apply the brake, turn on the power, turn the rotary knob three times - Dual Hall Booster (default is Single Hall Booster) with memory, repeat the above operation again to switch.

Note: It can only match the three-wire booster sensor.

◆ Under-voltage protection:

When the battery voltage falls to the under-voltage value of the controller, it will stop output automatically to protect the battery in time and prevent the battery pack from being damaged due to over-discharge.

◆ Power on anti-flying and running anti-flying:

Prevent the controller from powering on and flying due to line or turntable failure, improve the safety of vehicle use.

◆ MOS tube short-circuit protection:

automatically detects MOS tube faults when the controller is turned on to prevent series short-circuit damage to other MOS tubes.

◆ High temperature protection:

When the controller's own temperature is too high, it automatically reduces the output current or stops the output

◆ Rotation protection:

When the motor is blocked, the control cap automatically limits the current, and when blocked, the 2S catty cuts off the circuit to protect the motor and the controller in time.

Packing:

       1* Brushless Motor Controller