You MUST message me first with your sketch before purchasing. Please read below:

I custom cut polycarbonate twin wall and clear sheets from 48”x24” sized sheets. Before buying, please send me a picture or drawing of the design you want to confirm that I can make it. Please include measurements (to the 1/16”), hinge locations and handle locations.

To ensure a perfect fit, we require a clear sketch or diagram of the lid(s) you need.

Here’s what you must include in your sketch:

• Exact dimensions, accurate down to 1/16 of an inch

• Location of handles

• Location of any hinges or cutouts

Important: DO NOT describe your lid in writing only.

Verbal or text descriptions often lead to miscommunication. A simple hand-drawn sketch on paper or a diagram using the Freeform app (available on Apple devices) works best. You can take a photo or screenshot and send it to us via eBay messages.

No lid will be made without a diagram.

———————————————————-

There are 2 material variations to choose from:

1) 1/4” Twin wall polycarbonate (visible lines)

2) 3/16” Clear polycarbonate (transparent like glass)

We will call them “Twin Wall” and “Clear” for short.

Twin Wall is a more affordable option that has great insulating properties. They are mainly used for greenhouses because it lets sunlight through but keeps it warmly insulated. It is very light in weight.

Clear is a little more expensive, heavier but stronger. It also looks better because it looks clear like glass.

Then within each material variation, there are 3 variations of handles (also shown in the photos):

1) Crystal handle

2) Hooked handle

3) 1" drill hole

If there are doors on the lid, there will be hinges included. My hinges measure 1 3/4" length by 1 3/8" width. The hinges have self adhesive tape on it. Peel off the red backing and attach it in position.

FAQ:

How to measure your lid on a rimmed aquarium?

Answer:

Take a tape measure and extend from one end of the lip to the other end where the lid would sit on the rimmed tank. Take the measurement to the closest 1/16". My cuts have some variation of about 1/16" so the more accurate, the better. Do both length and width measurements.

Why would I buy your more expensive lid and not buy the Aqueon Glass Aquarium Lid for $30 on Amazon?

Answer:

I have an Aqueon lid and it is barely usable. The 20 gallon high glass lid does not fit the entire top of the aquarium. To get around this, Aqueon includes a plastic piece that clips onto the back of the lid so room for a hang-on-the-back filter can be put in. This plastic piece does not look good and sometimes cannot hold the weight of the lid. Also the hinged part is made of flexible plastic which wears out, cracks and tears off after time from constant opening and closing. My hinge on the Aqueon lid is barely hanging on, will probably be replace with one of mine.

Does the 3/16" Clear polycarbonate lid scratch easily?

Answer:

YES, it does scratch easily! Only use a soft cloth or sponge and mild soap and water to clean.

Should I choose the Twin Wall lid or the Clear lid?

Answer:

If price is an issue, the Twin Wall. If you want the best for your tank and want that WOW factor, go for the Clear polycarbonate.

Do the lids cut down on the light transmission for the live plants and fish in the aquarium?

Answer:

Clear polycarbonate is one of the most transparent of plastics. A visible light transmission of approximately 85-88%. Twin Wall is 80-85%.

Can you drill other feeding holes in the lid?

Answer:

Yes, I have drill bits for holes in sizes: 5/8”, 11/16”, 3/4”, 1”, 1 1/4”.

————————————————————