eBay

Twin Turbo Charger Kit TT 1000HP K for GM LS1 LS2 LS3 LS6 Vortec V8 4.8 5.3 6.2

~~~WANSMOKE~~~

Fast Shipping, 100% Customer Satisfaction !

WANSMOKE has the best products with the best prices. We believe in Safety and Standards in both machining and manufacturing. Unlike our competitors who offer you low prices for inferior products, we build products that lift and level your vehicle without compromise. Cutting corners is awesome when driving your car but not when manufacturing, buy right, choose Supreme.

Fits vehicles running with 294Cu / 325Cu / 364Cu / 376Cu V8 or engine swap

**for LS1 LS2 LS3 LS6 Vortec LSX 4.8L / 5.3L / 6.0L / 6.2L Twin Turbo Hot Part

CHEVY AVALANCHE CAMARO COLORADO CORVETTE IMPALA MONTE CARLO SILVERADO 1500 2500 3500 HD SUBURBAN TRAILBLAZER TAHOE SS SSR

GMC SIERRA 1500 2500 3500 HD CLASSIC YUKON CANYON

PONTIAC G8 GTO GRAND PRIX

Includes - AR.63 Turbocharger x (2)

Includes - Turbo Manifold
Includes - V-Band Flange Conversion Adapter x (2)

Includes - Stainless Turbo Exhaust Tube x (2)

Includes - 2 to 1 Front mount Intercooler

Includes - Intercooler Mounting Bracket Kit

Includes - Slim Fan Kit

Includes - Thermostat Relay Kit

Includes - Aluminum Piping Tubing

Includes - Silicone Coupler Hose

Includes - T-Bolt Clamp

Includes - Blow off Valve

Includes - Actuator Wastegate Conversion Kit x (2)

Includes - 3" Air Intake Filter x (2)

Includes - Boost Controller x (2)

Includes - Oil Feed Line x (2)

Includes - Oil Restrictor Adapter Flange x (2)

Includes - Oil Return Drain Line x (2)

Includes - Oil Pan Drain Plug Adapter x (2)

Includes - T3 4 Bolt Gasket x (2)

Includes - 2.5" V-band Flange & Clamp x (2)

Turbocharger

100% Brand New T3/T4 Turbocharger! High Quality Guaranteed! cast housing with durable steel. Capable of boosting horse power up To 450+ HP, standard T3 exhaust flange, CNC machined flanges. High quality t3/t4 with a forged turbine propeller wheel!

Specification

T3 flange

2.5" v-band outlet

Bearing: Wet Float Bearing

Turbine

-T3 Turbine flange

-Turbine .63 A.R.

-2.205" Minor and 2.570" Major Propellar

-2.274" Outlet

-12 Blade Type Turbine

Compressor

-3" Compressor Inlet

-2.130" Inducer

-2.755" Major

-2" Compressor Outlet

-T04B/T4 Type Compressor Housing

-Compressor .49 A.R.

-Compressor .50 Trim

-8 Blade Type T4 Compressor Wheel

Turbo Manifold

1. Made of High Quality T304 Stainless Steel Material

2. Front mount facing Design, Comes with T3 Turbo Flange inlet

3. CNC Machine Flange for MAX Strength and Durability

4. Increase Engine Exhaust Output and Efficiency.

5. High-quality parts for maximum durability and performance.

6. Computerized Mandrel-Bended to Maximize Air Flow Smoothness.

7. TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing.

Conversion Flange Adapter

1. 304 Stainless Steel material which is rust proof, wear resistant and durable, providing excellent strength.

2. provide flexibility and ease of installation in various turbo setups

3. Low-profile for adequate clearance in turbo installations

4. CNC Machine Flange for Strength and Durability

5. Made out of Heavy Duty Steel Alloy Material

6. Convert 3" V Band Tubing to T3 Flange

2 to 1 Intercooler

1. Made by high quality T-6061 Billet Aluminum Construction for light Weight and Durability.

2. Burst Tested To 150psi

3. Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level

4. Reducing Engine Inlet Temperature

5. Hot Air Temperature: 32°F~302°F (0°C~150°C)

6. Compress Air Flow Rate: < 350 Cubic Feet/Min Rated to 1000 Max HP

7. CNC Machine Flange for MAX Strength and Durability

8. Core Size: 24"x11"X3" , Overall Size: 32"x12"x3" , Two 3" Inlet & One 3" Outlet

Slim Fan

1. Thickness: 2.36"

2. 12V 80Watt

3. Maximum Fan CFM: 2,000 cfm

4. Push or Pull Type

5. Included mounting Bracket

Thermostat Relay Kit

1. Activates by grounding single electric fan at preset temperature.

2. This kit is set up to turn your electric fan on at 160 degrees and shut off at 145 degrees and will work with any 12 volt system.

3. 3/8" NPT thread-in brass probe.

4. Probe typically threads into engine block, radiator, water outlet or manifold.

5. This kit includes everything you'll need to hook up to your fan.

Turbo Exhaust Pipe

1. 90 Degree Stainless mandrel bent module with V band flanges on both ends.

2. Made of Heavy Duty Stainless Steel Material for Strength and Durability.

3. Fit with 2.5" V-band exhaust or that matter

4. 2.5" Primary Tube. 2.5" ID inlet / outlet

Aluminum Piping

1. Made of High quality T-6061 LIGHTWEIGHT Aluminum Piping.

2. Powder-Coated Surface Finish.

3. Increase 65% Air Flow comparing with other Standard Piping.

4. 2.0mm Pipe Thickness

5. 3.0" Piping Diameter. Working Pressure: 5~50PSI

Blow Off Valve

1. Aggressive JDM racing discharge sound.

2. High-Quality Diaphragm and Short Stroke Significantly Increase Response

3. Dual Spring System Promoted Response and Allows for High Boost Pressures

4. Hard-Anodized Valve for Increased Air Flow

5. 50Mm Flange Diameter; Holds Up to 35PSI Boost Pressure

6. CNC Machined Billet Aluminum Body

Actuator Wastegate

1. High strength Alloy aluminum body with steel head.

2. Comes with 12 psi spring installed.

3. Protect the turbo system from over boosting.

4. Complete install kit included.

Boost Controller

1. Allows to adjust PSI ratings without changing the wastegate springs as well as replacing the wastegate springs.

2. High Performance Manual Boost Control From 0~30 psi Capacity.

3. CNC Machined Light Weight and Resistant to Rust.

4. Hose clamp and all necessary hardware for complete installation.

5. 1-30 PSI Adjustable.

Silicone Coupler

1. Made of high quality silicone material

2. Thickness of wall:5 mm, 4 ply reinforced

3. Working Pressure: 0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI)

4. Bursting Pressure: 2 Mpa

5. Working Temperature: -76°F (-60°C ) to +500°F (+260°C)

6. Size tolerance:+/-0.5 mm

Oil Line Kit

1. OIL DRAIN RETURN & FEED LINE.

2. 10AN Fittings.

3. Inner Diameter: 0.50"

4. Length: 17.00"

5. CNC Machined Turbo Adapter Plate.

6. Weldable 10AN Oil Pan Fitting Included.

7. Inner Diameter: 0.25"

8. Length: 36.00"

9. 1/8 NPT Fittings Natural Polish Finish.

10. CNC Machined Turbo Adapter Plate.

11. Brass Fitting Block Fitting and Port Cover Included

T-Bolt Clamp

1. Made of High quality 301 SS Stainless Steel Clamp

2. Stainless steel construction resists corrosion

3. Provide uniform sealing pressure for a positive

4. Polished finish increases engine bay aesthetics

Air Filter

1. Oil-free filter Micro cotton gauze type filter material washable with water or soap and reusable.

2. Improves Up to 95% Filtration Efficiency.

3. Designed to increase horsepower and acceleration.

4. Stands Roughly Around: 6" , Overall Tall: 3.5" , Inlet: 3.0"

Attention:

1. For emissions related items please check with your local jurisdiction for emission specific requirements before purchasing. NO installation instruction included unless otherwise specified. If item is questionable please consult your local professional/mechanic before making purchase.

2. NO instructions included. modification might required for complete installation.

3. Professional TURBO INSTALLER is Highly recommend. Any damage during installation will not be refunded.

4. Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrive.

5. Don't hesitate to contact us if item stuck, unknown or fault installation

Purchase now for only $0.00!

Transit

Items are shipped as soon as possible! Please review the guidelines below:

Items ordered by 10:00am PST will be shipped the same day, with the exception of weekdays and US holidays
Items will not be shipped over the weekend
Surcharges will be added to VI, PR, HI, AK, MP, AS
Some (large) items cannot be shipped to PO Box or APO/FPO
International buyers are responsible for CUSTOMS FEES and/or DUTY FEES upon import
Ships from Southern California, USA

Continental USA	US Territories	Canada	International
$0.00	$0.00 +surcharge	$350.00	$1000.00

Returns	Warranty
Prepaid return shipping labels offered for customers who experience defective items, or items received that are not represented by this listing Generally, returns are subject to up to 10% restocking fees, depending on the item itself, length of return, and condition of the return	Original items must first be returned for inspection to take advantage of the three-month warranty Warranty replacements cannot be shipped until the original item is first returned!

Contact

For item inquiries, please click "Ask Seller A Question" or "Contact Seller" link. We Strive To Respond In A Timely Fashion!
E-mails are responded to within 24 hours Monday-Friday, with the exception of US Holidays
We Strive For 100% Customer Satisfaction, If You Are Not 100% Satisfied With Your Purchase, Please Contact Us Prior To Leaving Feedback! We Would Very Much Appreciate A Chance To Make Things Right!
Local pickup is available on request!