Hand-Mic Mount Base for FTM-300DR FTM-300 FTM-7250DR FTM-7250 for Wrangler Chevy FD Off-Road SUV

---

Product description

• Fitment:FT-2980R FT-2980 FTM-400DR FTM-400XDR FTM-300DR FTM-300 FTM-7250DR FTM-7250 FTM-3100R FTM-3207DR FTM-3207 FT-897D FT-857D FTM-350 FT-1900R FT-2900R FT-7800R FT-8800R FT8900R FTM-300DR 300 7250DR 7250 400DR 400XDR 450D
• Advantages:Strong suction for your hand-mic.The magnet in the middle of the groove can be tightly fixed to the back of the walkie-talkie that can prevent the hand microphone from falling off when riding on the rough road
• Material:Silver brushed surface metal with glue which give the perfect viscous force looks simple and elegant.Anti-High Temperature.Anti-Aging and Durable
• Strong adhesive tape:Few seconds needed.If you don’t need them,you can also remove it in few seconds and no trace left
• Adapted models: JP,Chevy,FD. All Model Off-Road SUV.Hand-Mic Mount

• NOTE: Be careful tightening the screw,for prevent damage magnet by tightening ti to much.

Compatible for:

FT-2980R FT-2980 FTM-400DR FTM-400XDR FTM-300DR FTM-300

FTM-7250DR FTM-7250 FTM-3100R FTM-3207DR FTM-3207 FT-897D

FT-857D FTM-350 FT-1900R FT-2900R FT-7800R FT-8800R FT8900R

FTM-300DR 300 7250DR 7250 400DR 400XDR 450D

Strong adsorption power

The bracket and walkie-talkie rely on magnets, tightly adsorbed together. Even on a bumpy mountain road, it doesn't fall off easily.

NOTE: Be careful tightening the screw,for prevent damage magnet by tightening ti to much.

Red back glue

• Make sure the walkie-talkie bracket sticks on the car without falling off and shaking.

• if you do not like, you can easily tear off without leaving traces.

How to install?

Install the magnet on the back of the walkie-talkie and fix it with screws. (NOTE: Tighten carefully so as not to damage the magnets with excessive force)

• Wipe the place where the bracket will be installed to make sure it is clean and level.
• Tear off the adhesive on the stand and stick it where you want. For better adhesion, it is recommended to stick for 24 hours before proceeding to the next step.
• Finally, aim the magnet behind the walkie-talkie at the center of the bracket and you will find that they are firmly attached to each other.