| Description |
| NOTE: Be sure to discharge all capacitors before testing them.
The test seat is divided into a transistor test area and a Zener diode test area, of which KAA is the Zener diode test area
Product description:
1. Can measure transistors, diodes, resistors, capacitors, inductors, thyristors, field effect transistors, voltage regulators, double diodes, light-emitting diodes, etc. 2. Can measure voltage 3. Built-in lithium battery, long battery life Illustrate:
①For charging, please use an external 5V power supply or a mobile phone USB power supply ②The indicator light is red to indicate charging, and the indicator light is green to indicate that charging is complete Reminder: The maximum charging input voltage is 6V, please do not use overvoltage, otherwise the tester will be damaged and the battery may explode 4. Infrared decoding function
Aim the infrared remote control at the "IR" test hole of the tester, and press the remote control button If the tester decodes successfully, the user code and data code will be displayed, and the corresponding infrared waveform will be displayed. If the decoding fails or cannot be decoded, the user code and data code will not be displayed. At this time, if you are in the tester interface, you cannot enter the infrared decoding interface. If you are in the infrared decoding interface, the last successful decoding information will still be displayed. The dot in the upper right corner is used to indicate whether infrared data is received from the remote control, red means receiving infrared data, blue means decoding is successful 5. Automatic calibration Short-circuit three test sockets, short press the multi-function button, and the tester will automatically calibrate. After disconnecting the short wire as prompted during calibration, no other operations are required. Package includes:
1 x Multifunction TFT Transistor Tester 1 x Electronic Components Kit (Shipped randomly) 3 x Test hooks |