ETC's UFMP4 is a 4-zone DMX Foundry Mini Panel with four relays and four 0-10V dimming outputs. Each Foundry Mini Panel from ETC can be wired with a discrete power input for each circuit, or a single input may be shared across multiple circuits. With support for both 120V and 277V circuits simultaneously, as well as normal and emergency circuits, allowing these Foundry Mini Panels to offer unmatched flexibility. Fully isolated 0-10V dimming is also standard for each output, meaning Foundry Mini Panels offer outstanding versatility in a compact, robust package.
DMX-controlled Unison Foundry products are the perfect partners for Unison Paradigm and Mosaic systems to create a complete, economical lighting control package. The Foundry Mini Panel takes 20A branch circuit input and provides four or eight switched power control outputs with fully-isolated 0-10V dimming per output.
Applications:
Arena and stadium suites
Office buildings
Conference and meeting rooms
Healthcare facilities
Houses of worship
Classrooms
Hospitality and restaurants
Retail
ETC UFMP Foundry Mini Panel Features:
Switched power control of four or eight circuits with 0-10V dimming
120 or 277VAC power input per zone
20 Amp fully rated relays for use with general purpose, tungsten, fluorescent, LED and plug loads
0-10V dimming output per zone for direct connection to dimming ballasts and LED drivers
Demand Response load shedding contact input
UL924 control bypass via:
Contact closure input
Normal power loss sense feed terminals
DMX controlled and RDM configurable
ETC UFMP Foundry Mini Panel Series Specifications:
Functional:
Control for up to eight zones of switching for lighting and plug loads
Control for up to eight zones of 0-10V dimming for LED drivers and fluorescent ballasts
UL924 emergency-lighting control via contact closure and power loss sense feed terminal
Demand Response input provided by a power company can enforce a maximum level per circuit while active
Supports USITT DMX512-A (ANSI E1.11)
Supports RDM (ANSI E1.20)
Mechanical:
Constructed of 16-gauge cold-rolled steel, finished in fine-textured, black powder coat
Wall-mount installation; -- rated for installation in plenum air space
Class-1 voltage barrier prevents access to line-voltage wiring with front panel removed
Optional voltage divider allows for separation of normal and emergency circuits in a single controller where allowed by local codes
Electrical:
100-277V, 50/60Hz power input per circuit with support for pass thou to multiple circuits
Supports 120V and 277V circuits within the same panel
20-Amp, fully-rated bi-state latching relay per output
0-10VDC control rated for up to 100mA sink per output
0-10V outputs are fully isolated from ground to 2500V RMS
Rising clamp screw terminal wiring connections for:
Line-voltage relay power input, output and pass-through with support for 14-8 AWG wire
Low-voltage 0-10V dimming output per zone with support for 22-16 AWG wire
Separate normal power sense feed input for UL924 emergency lighting bypass
UL924 emergency lighting control contact closure input with support for 22-16 AWG wire
Demand Response contact input with support for 22-16 AWG wire
Demand Response input supports Normally Open (NO) operation
UL924 contact closure input supports normally open (NO) or normally closed (NC) operation
Onboard status indicators for controller power, DMX signal, Demand Response input, and UL924 emergency lighting control
Slide switch configuration for:
UL924 operation (NO/NC)
UL924 inclusion per circuit (on/off)
UL and cUL LISTED -- Conforms to UL508, UL2043, UL916 and UL924
DMX Input Port:
Optically-isolated input from the Mini Panel electronics
Withstands fault voltages of up to 250VAC
Integrated DMX/RDM termination
Configuration:
Remote configuration available via RDM devices such as:
ETC control console with RDM functionality
ETC DMX/RDM gateway networked to a device running ETC Net3 Concert software
Manual configuration of the starting DMX address, UL924 bypass, and Demand Response on the controller
Thermal:
Ambient room temperature: 32 to 122°F (0 to 50°C)
Ambient humidity: 5 to 95% non-condensing
Physical:
Dimensions (HxWxD): 9" x 12" x 3"
Weight: 6 lbs