Housing Plate / Casing for Jeep Willys T-90A 3-Speed Manual Transmission

This product data sheet is originally written in English.


This is a high-quality replacement housing plate / casing designed specifically for the Borg‑Warner T‑90A 3-speed manual transmission used in many Jeep Willys models.

📋 Item Specifics

  • Condition: New

  • Brand: Aftermarket

  • Material: Steel 

  • Fitment / Model: Jeep Willys T-90A 3-Speed Manual Transmission

  • Compatible With: Jeep Willys 

  • Manufacturer Part Number: Does Not Apply

  • Placement on Vehicle: Transmission housing plate / casing

  • Country/Region of Manufacture: INDIA

🔧 Installation Guide (General)

(T-90 transmissions are simple, old-school gearboxes, making installation straightforward for mechanics.)

Basic Installation Steps:

  1. Remove the transmission from the vehicle (disconnect driveshaft, clutch linkages & mountings).

  2. Disassemble the gearbox by removing the front/rear bearing caps, top cover, and internal shafts.

  3. Remove the old housing plate if damaged or cracked.

  4. Clean all mating surfaces – remove old gasket material, dirt, and oil.

  5. Place the new housing plate in the same orientation as the original.

  6. Reinstall internal gears & shafts carefully following alignment marks.

  7. Use new gaskets or sealant for leak-free operation.

  8. Torque bolts to OEM specifications (as per service manual).

  9. Reassemble the gearbox completely and ensure smooth gear engagement before refitting.

  10. Install transmission back into the Jeep, reconnect all linkages, refill gear oil, and perform a test run.

Professional installation is recommended for best results—especially for vintage gearboxes.

🔍 Compatibility

Fits Willys vehicles equipped with the T-90A 3-speed manual transmission. Please confirm your transmission variant and fitment before purchasing.

📦 Package Includes

  • 1 × Housing Plate / Casing for T-90A transmission

💬 Why Choose Us

⭐ Premium Quality Parts – Tested for performance and durability
🚚 Fast Dispatch & Secure Packaging 
💬 Dedicated After-Sales Support – We assist until your issue is resolved

📝 Note

Please compare your original part before purchasing. 
If unsure, send us photos of your gearbox—we’ll confirm compatibility.

🔥 Perfect for Classic Jeep Restorers

Bring your T-90 gearbox back to life with a tough, reliable, precision-fit housing—built to last for decades.

🛒 Add to Cart Now — Give Your Jeep Willys the Strength It Deserves!

This is a high-quality replacement housing plate / casing designed specifically for the Borg‑Warner T‑90A 3-speed manual transmission used in many Jeep Willys models. (T-90 transmissions are simple, old-school gearboxes, making installation straightforward for mechanics.) Remove the transmission from the vehicle (disconnect driveshaft, clutch linkages & mountings). Disassemble the gearbox by removing the front/rear bearing caps, top cover, and internal shafts. Install transmission back into the Jeep, reconnect all linkages, refill gear oil, and perform a test run. Fits Willys vehicles equipped with the T-90A 3-speed manual transmission. Please confirm your transmission variant and fitment before purchasing. Bring your T-90 gearbox back to life with a tough, reliable, precision-fit housing—