Brake Fluid Tester for Cars LED Indicator Auto Test Tool For DOT3 / DOT4/DOT5
 Instructions:
Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance.
 

How Dangerous of a bad quality Brake Fluid ?

1) The inferior brake fluid causes the brake failure easily,thereby lead to a accident
2) The Brake fluid is related to the life of Brade pads, if doesn't take it seriously, the life of brake pads is worried.
 

The testable brake fluid list:

brake-fluid-tester_04

 

Good or Bad Distinguish accurately !

Our Brake Fluid tester designs 4 level digital led indicator that can provide the accurate water content for you.

 

LED Indicator Display:

1.5 LEDs indicating the water % in the brake fluid:
 
The green LED lights
0% light indicates that the battery is OK, no replacement
 
The yellow LED lights
1% light indicates that moisture content of brake oil less than 1% , brake fluid has a good performance, and ease of use.
4.2% light indicates that moisture content of brake oil less than 2%, brake fluid can be continued to use
 
The red LED lights
5.3% light indicates that moisture content of brake oil less than 3% , proposed to replace brake fluid.
6.4% light indicates that moisture content of brake oil less than 4%, brake fluid should be replaced immediately.
 
Red LED: change brake fluid
 
Functions:
1.check the car brake oil quality
2.5 LED lights display the percentage of moisture content in brake fluid,how the test results more accurate
3.Press the button for power on, green LED will light up.
4.Insert the tester into reservoir for a second , then the results will be indicated correctly by LEDs.
5.Testing for DOT 3, DOT4, DOT5 brake fluid
6.Auto power off, Supports 1 LR03 AAA batteries (not included)
 
Technical parameters:
Green: Battery OK, that is, brake fluid does not contain water
 
Green / yellow: brake oil in water content of less than 1%, better brake fluid performance, ease of use.
 
Green / yellow / yellow: brake oil in water content of about 2%, brake fluid can continue to use.
 
Green / yellow / yellow / red: brake oil in water content of about 3%, the proposed replacement of brake fluid.
 
Green / yellow / yellow / red / red: brake oil in water content of at least 4%, the brake fluid must be replaced immediately responsible for very dangerous.
 

Accurate To 1% For TEST

 

The Metrics is accurate to 1%, it can help you to know the situation of Brake Fkuid more clearly .

 

How to use Brake fluid tester ?

Step 1 : Open car's front cover

Step 2 : Find the brake Oil tank mouth

Step 3 :Dip test probes and read the Led lights

Step 4: Recover the car's front cover

a1

 
Package List:
1 x Brake fluid tester (Battery not included)
 
 
PushAuction

Datacaciques