|
|
|
|
|
|
|
|
|
|
|
Fitment?
For Toyota Tacoma Base 2.7L 2005-2015
For Toyota Tacoma Base 4.0L 2005-2015
For Toyota Tacoma Pre 2.7L 2005-2015
For Toyota Tacoma Pre 4.0L 2005-2015
For Toyota Tacoma SR5 4.0L 2006-2009
For Toyota Tacoma TRD 4.0L 2006-2015
For Toyota Tacoma X-Runner 4.0L 2005-2013
Product Description
Seamless replacement - this headlight assembly was specifically designed to look and function like the original headlight on specific vehicles
Excellent value - original equipment quality at a lower price
Durable materials - rigid plastic protects against weather and road conditions
Easy installation - built to match the exact original dimensions for proper fit
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1.Undo the screws, clips, or retainer springs that hold the headlight in place.
2.Disconnect the wiring from the assembly.
3.Detach the headlight from the vehicle to replace it with a new one.
4.Fit in the new headlight assembly.
5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs are sealed.
6.Reconnect the wiring that was unplugged from the assembly.
7.Put back the grille and other components that you removed. Seal them back into place.
8.Test the new assembly.
Tips
Condensation DOES NOT Mean A Product Problem
It's normal that the condensation appears inside the headlights because of temperature differences, air pressure, etc, thus it does not mean headlight malfunction.
How to Remove Temporary Condensation
Way 1. Check if the vents are blocked and switch on the low beam light for about 20 mins
Way 2. Take the headlight bulb out and drive out moistur
Way 3. Put a silica gel packet in the housing to soak up moisture
| Item Specifics | |
|---|---|
| Brand | parthigh |
| Manufacturer Part Number | pthO12877901PS |
| Interchange Part Number | 81560-04160 |
| OE/OEM Part Number | 81550-04160 |
| Placement on Vehicle | Rear Right Left |
| Manufacturer Warranty | 5 Years |
| Fitment Type | Direct Replacement |
| Features | DOT-Certified |
| Type | Tail Light Assembly |
| Lighting Technology | LED |
| Mounting Hardware Included | No |
| Dust and Moisture Protection | Yes |
| Assembly Type | Composite |
| Shipping Country | US |
| Lens Color | Clear |
| Housing Color | Red |
| Universal Fitment | No |
| Vintage Car Part | Yes |
| Finish | Smooth |
| Water Proof | Yes |
| Condition | New |
(California Customers should pay more attention about it.)
We accept all ebay payment
99% of orders shipped within 24 hours.
2-8 days in transit.
Nice and strong packing.
UPS
, USPS
, fedEx
comes to be our first choice.
This item is backed by our 1-year warranty.
Refund will be given as money back or replacement
Item must be returned in original pacakge and packing the same as received.
Seller is responsible for the return if delivered item not the same as described or received damaged.
If you have a question about the item you should contact us before bidding.
Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).
Our Customer Service Team is always online to answer.
Shop Category Hot Item
New List Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
For 2005-2015 Toyota Tacoma Taillights Assembly Brake Turn Lamps Left+Right
Fitment?
Product Description
Seamless replacement - this headlight assembly was specifically designed to look and function like the original headlight on specific vehicles Excellent value - original equipment quality at a lower price Durable materials - rigid plastic protects against weather and road conditions Easy installation - built to match the exact original dimensions for proper fit
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1.Undo the screws, clips, or retainer springs that hold the headlight in place. 2.Disconnect the wiring from the assembly. 3.Detach the headlight from the vehicle to replace it with a new one. 4.Fit in the new headlight assembly. 5.Fix the new headlight into place and make sure that the screws, clips, or retainer springs are sealed. 6.Reconnect the wiring that was unplugged from the assembly. 7.Put back the grille and other components that you removed. Seal them back into place. 8.Test the new assembly.
Tips
Condensation DOES NOT Mean A Product Problem It's normal that the condensation appears inside the headlights because of temperature differences, air pressure, etc, thus it does not mean headlight malfunction.
How to Remove Temporary Condensation
Way 1. Check if the vents are blocked and switch on the low beam light for about 20 mins Way 2. Take the headlight bulb out and drive out moistur Way 3. Put a silica gel packet in the housing to soak up moisture
Warning
(California Customers should pay more attention about it.) Payment
We accept all ebay payment Shipping
99% of orders shipped within 24 hours. 2-8 days in transit. Nice and strong packing. UPS Return
This item is backed by our 1-year warranty. Refund will be given as money back or replacement Item must be returned in original pacakge and packing the same as received. Seller is responsible for the return if delivered item not the same as described or received damaged.
About Us
If you have a question about the item you should contact us before bidding. Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).
All rights reserved. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
