|
|
|
|
|
|
|
|
|
|
Application
- For Acura Integra 1986-2001 (All trims EXCEPT Type-R)
- For Chevrolet Aveo 2004-2024 (4x100 Model Only)
- For Chevrolet Cobalt 2005-2010
- For Chevrolet Spark 2013-2013-2024 (4x100 Model Only)
- For Daewoo Lanos 1999-2002
- For Daewoo Nubira 1999-2002
- For Dodge Neon 1995-2005
- For Fiat 124 Spider 2017-2019
- For Ford Escort 1991-2001 (4x100 Model Only)
- For Honda Accord 1982-1989
- For Honda Civic 1980-2005 (4x100 Model Only)
- For Honda Fit 2007-2024
- For Honda Insight 2000-2006&2010-2014
- For Honda Prelude 1988-1991
- For Hyundai Accent 2000-2024
- For Kia Rio 2001-2019
- For Kia Rio5 2006-2011
- For Kia Sephia 1994-2004
- For Lotus Elise 2006-2011
- For Lotus Exige 2006-2011
- For Mazda 2 2011-2014
- For Mazda MX-5 Miata 2016-2024
- For Mazda Miata 1990-2005
- For Mazda Protege 1.6L 1.8L 1995-2003
- For Mercury Tracer 1991-1999
- For Mitsubishi Lancer 2002-2005
- For Mitsubishi Mirage 1991-2020 (Will Not Fit 1.6i VR, 1.6i ZR & 1.8T.)
- For Plymouth Colt 1986-1993
- For Plymouth Horizon 1987-1990
- For Saturn Ion 2003-2007
- For Saturn SC 1991-1992
- For Saturn SL 1991-2002
- For Scion xA 2004-2006
- For Scion xB 2004-2006
- For Toyota Celica 1986-1991
- For Toyota Corolla 1993-2002
- For Toyota Echo 2000-2005
- For Toyota MR2 Spyder 2000-2006
- For Toyota Paseo 1992-1999
- For Toyota Prius 2001-2003
- For Toyota Tercel 1990-1999
- For Toyota Yaris 2004-2020
Description
- Spacer Thickness: 2 inch (51 mm)
- Vehicle Bolt Pattern: 4x3.94 inch (4x100 mm)
- Wheel Bolt Pattern: 5x4.5 inch (5x114.3 mm)
- Center Bore Size: 67 mm
- Thread Size: 12x1.5
- Torqued Down By Hand At: 70-80 FT/LBS
- Fitment Note: Bolt Pattern Conversion, Only work for 4x100mm 4 Lug Vehicle Models with 5x114.3mm 5 Lug Wheels
Installation
- Loosen the Lug Nuts
Common mistake: the first step should be loosening the lug nuts rather than jacking up the vehicle. That’s because you cannot get enough torque on a wheel suspended in the air. So make sure loosening all the wheel lug nuts in turn with a spanner before jacking up the vehicle.
Notification: Just Loosen them, there is no need to unscrew them completely.
- Jack up the Vehicle, Remove the Wheels
Jack up and support the vehicle on the Jack stand, then remove the jack. Finally, remove all nuts and take away the wheels.
- Clean up the Hub
Clean gunk wire brush, put some Loctite on the hub and thread pitch. Avoid collision to the main part and install the wheel spacers to the vehicle.
- Installing the Wheel Spacers
Install the wheel spacers, but use the supplied lug nuts instead of the stock lug nuts. Place the wheel spacer on the studs of the hub. Make sure the studs of wheel spacers face outwards. Later, install the supplied lug nut in a star sequence.
Notification:
- Fix thelugnuts in a diagonal/star pattern in sequence. This will ensure a reliable installation.
- Do notuse Impact Wrench during installation! It may cause damage to both the vehicle and the product!
- Please check the exact torque from theinstructions,
- To prevent loose, thread adhesive can be added during installation.
- Check the Installation
Failure to clean up may cause a gap between the wheel spacer and the hub, which may allow a vibration of vehicle while driving.
Place the spacer on the factory hub. The spacer should sit flush with the brake rotor. If there is any gap between the brake rotor and the spacer, even if it is small. Don’t use the spacer! Please be sure to check this. You shouldn’t even be able to slide a piece of paper the spacer on the factory hub.
- Reinstalling the Wheels
Install the wheels to the wheel spacers. Please note that the wheel lug nuts should be fitted in the same way as the wheel spacers lug nuts ---- tighten the lug nuts in diagonal or star sequence.
Again it is not necessary to fully fit the nuts in place for this step, just keep them for the next step.
Notification: Fix in the order in which the pentagrams are drawn. In the case of six or more holes, fix them roughly in diagonal order.
- Follow-up Inspection
Once everything is in place, drive the vehicle and check for any unusual vibration.
Re-torque all lug nuts after 50-100 miles of driving ,then again after 2000-3000 miles.
| Item Specifics | |
|---|---|
| Brand | PARTHIGH |
| Manufacturer Part Number | PART845410HIGH |
| Number of Pieces | 4 |
| Color | Silver |
| Material | Aluminum |
| Features | Easy Installation, Durable, Rust-resistant Coating |
| Placement on Vehicle | Front Rear |
| Type | Wheel Adapter Sapcer |
| Item Included | Spacer, Lug Bolt, Lug Nut |
| Spacer Thickness | 2 inch (51mm) |
| Vehicle Lug Quantity | 4 |
| Wheel Lug Quantity | 5 |
| Vehicle Bolt Pattern | 4x3.94 inch (4x100mm) |
| Wheel Bolt Pattern | 5x4.5 inch (5x114.3mm) |
| Center Bore Size | 67mm |
| Hubcentirc | Yes |
| Thread Pitch | M12x1.5 |
| Torqued Down By Hand At | 70-80 FT/LBS |
| Bolt Shank Length | 33mm |
| Interchange Part Number | 4x100 to 5x114. wheel adapters 2 inch thick with 12x1.5 Studs |
| Note | NOT for original wheel, Only work with 5x4.5"/ 5x114.3mm Wheel |
(California Customers should pay more attention about it.)
We accept all ebay payment
99% of orders shipped within 24 hours.
2-8 days in transit.
Nice and strong packing.
UPS
, USPS
, fedEx
comes to be our first choice.
This item is backed by our 1-year warranty.
Refund will be given as money back or replacement
Item must be returned in original pacakge and packing the same as received.
Seller is responsible for the return if delivered item not the same as described or received damaged.
If you have a question about the item you should contact us before bidding.
Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).
Our Customer Service Team is always online to answer.
Shop Category Hot Item
New List Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
For Toyota 4x100 Convert to 5x114.3 Wheels (4) 2" Wheel Adapters 4 Lug to 5 Lug
Application
Description
Installation
Common mistake: the first step should be loosening the lug nuts rather than jacking up the vehicle. That’s because you cannot get enough torque on a wheel suspended in the air. So make sure loosening all the wheel lug nuts in turn with a spanner before jacking up the vehicle. Notification: Just Loosen them, there is no need to unscrew them completely.
Jack up and support the vehicle on the Jack stand, then remove the jack. Finally, remove all nuts and take away the wheels.
Clean gunk wire brush, put some Loctite on the hub and thread pitch. Avoid collision to the main part and install the wheel spacers to the vehicle.
Install the wheel spacers, but use the supplied lug nuts instead of the stock lug nuts. Place the wheel spacer on the studs of the hub. Make sure the studs of wheel spacers face outwards. Later, install the supplied lug nut in a star sequence. Notification:
Failure to clean up may cause a gap between the wheel spacer and the hub, which may allow a vibration of vehicle while driving. Place the spacer on the factory hub. The spacer should sit flush with the brake rotor. If there is any gap between the brake rotor and the spacer, even if it is small. Don’t use the spacer! Please be sure to check this. You shouldn’t even be able to slide a piece of paper the spacer on the factory hub.
Install the wheels to the wheel spacers. Please note that the wheel lug nuts should be fitted in the same way as the wheel spacers lug nuts ---- tighten the lug nuts in diagonal or star sequence. Again it is not necessary to fully fit the nuts in place for this step, just keep them for the next step. Notification: Fix in the order in which the pentagrams are drawn. In the case of six or more holes, fix them roughly in diagonal order.
Once everything is in place, drive the vehicle and check for any unusual vibration.
Warning
(California Customers should pay more attention about it.) Payment
We accept all ebay payment Shipping
99% of orders shipped within 24 hours. 2-8 days in transit. Nice and strong packing. UPS Return
This item is backed by our 1-year warranty. Refund will be given as money back or replacement Item must be returned in original pacakge and packing the same as received. Seller is responsible for the return if delivered item not the same as described or received damaged.
About Us
If you have a question about the item you should contact us before bidding. Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
