|
|
|
|
|
|
|
|
|
|
Application
- For Acura CL 1997-1999
- For Acura Legend 1986-1990
- For Acura TL 1995-2000
- For Acura Vigor 1992-1993
- For Eagle Summit 1989-1993
- For Ford Festiva 1988-1993
- For Honda Accord 1990-2002
- For Honda Prelude 1992-1996
- For Hyundai Accent 1998-2000
- For Hyundai Elantra 1992-2000
- For Hyundai Sonata 1989-2001
- For Hyundai Tiburon 1997-1999
- For Kia Optima 2001-2004
- For Kia Spectra 2005-2008
- For Kia Spectra5 2005-2008
- For Mazda 626 1983-1987
- For Mazda RX-7 1984-1988
- For Mercury Capri 1991-1994
- For Mercury Tracer 1988-1990
- For Mitsubishi Galant 1985-1996
- For Mitsubishi Lancer 2002-2006
- For Suzuki Forenza 2004-2008
- For Suzuki Reno 2005-2008
- For Suzuki Verona 2004-2006
- For Toyota Celica 1976-1985
- For Toyota Cressida 1985-1988
- For Toyota Van 1984-1989
- For Volvo S40 2000-2004
- For Volvo V40 2000-2004
Description
- Spacer Thickness: 2 inch (51 mm)
- Vehicle Bolt Pattern: 4x4.5 inch (4x114.3 mm)
- Wheel Bolt Pattern: 5x4.5 inch (5x114.3 mm)
- Center Bore Size: 72 mm
- Thread Size: 12x1.5
- Torqued Down By Hand At: 70-80 FT/LBS
- Fitment Note: Bolt Pattern Conversion, Only work for 4x114.3 4 Lug Vehicle Models with 5x114.3 5 Lug Wheels
Installation
- Loosen the Lug Nuts
Common mistake: the first step should be loosening the lug nuts rather than jacking up the vehicle. That’s because you cannot get enough torque on a wheel suspended in the air. So make sure loosening all the wheel lug nuts in turn with a spanner before jacking up the vehicle.
Notification: Just Loosen them, there is no need to unscrew them completely.
- Jack up the Vehicle, Remove the Wheels
Jack up and support the vehicle on the Jack stand, then remove the jack. Finally, remove all nuts and take away the wheels.
- Clean up the Hub
Clean gunk wire brush, put some Loctite on the hub and thread pitch. Avoid collision to the main part and install the wheel spacers to the vehicle.
- Installing the Wheel Spacers
Install the wheel spacers, but use the supplied lug nuts instead of the stock lug nuts. Place the wheel spacer on the studs of the hub. Make sure the studs of wheel spacers face outwards. Later, install the supplied lug nut in a star sequence.
Notification:
- Fix thelugnuts in a diagonal/star pattern in sequence. This will ensure a reliable installation.
- Do notuse Impact Wrench during installation! It may cause damage to both the vehicle and the product!
- Please check the exact torque from theinstructions,
- To prevent loose, thread adhesive can be added during installation.
- Check the Installation
Failure to clean up may cause a gap between the wheel spacer and the hub, which may allow a vibration of vehicle while driving.
Place the spacer on the factory hub. The spacer should sit flush with the brake rotor. If there is any gap between the brake rotor and the spacer, even if it is small. Don’t use the spacer! Please be sure to check this. You shouldn’t even be able to slide a piece of paper the spacer on the factory hub.
- Reinstalling the Wheels
Install the wheels to the wheel spacers. Please note that the wheel lug nuts should be fitted in the same way as the wheel spacers lug nuts ---- tighten the lug nuts in diagonal or star sequence.
Again it is not necessary to fully fit the nuts in place for this step, just keep them for the next step.
Notification: Fix in the order in which the pentagrams are drawn. In the case of six or more holes, fix them roughly in diagonal order.
- Follow-up Inspection
Once everything is in place, drive the vehicle and check for any unusual vibration.
Re-torque all lug nuts after 50-100 miles of driving ,then again after 2000-3000 miles.
| Item Specifics | |
|---|---|
| Brand | PARTHIGH |
| Manufacturer Part Number | PART129976HIGH |
| Number of Pieces | 2 |
| Color | Silver |
| Material | Aluminum |
| Features | Easy Installation, Durable, Rust-resistant Coating |
| Placement on Vehicle | Front Rear |
| Type | Wheel Adapter Sapcer |
| Item Included | Spacer, Lug Bolt, Lug Nut |
| Spacer Thickness | 2 inch (51mm) |
| Vehicle Lug Quantity | 4 |
| Wheel Lug Quantity | 5 |
| Vehicle Bolt Pattern | 4x4.5 inch (4x114.3mm) |
| Wheel Bolt Pattern | 5x4.5 inch (5x114.3mm) |
| Center Bore Size | 72mm |
| Hubcentirc | No |
| Thread Pitch | M12x1.5 |
| Torqued Down By Hand At | 70-80 FT/LBS |
| Bolt Shank Length | 32mm |
| Interchange Part Number | 4x114.3 to 5x114.3 wheel adapters 2 inch thick with 12x1.5 Studs |
| Note | NOT for original wheel, Only work with 5x4.5"/ 5x114.3mm Wheel |
(California Customers should pay more attention about it.)
We accept all ebay payment
99% of orders shipped within 24 hours.
2-8 days in transit.
Nice and strong packing.
UPS
, USPS
, fedEx
comes to be our first choice.
This item is backed by our 1-year warranty.
Refund will be given as money back or replacement
Item must be returned in original pacakge and packing the same as received.
Seller is responsible for the return if delivered item not the same as described or received damaged.
If you have a question about the item you should contact us before bidding.
Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).
Our Customer Service Team is always online to answer.
Shop Category Hot Item
New List Item
Excellent Delivery
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
4x114.3 Convert to 5x114.3 | (2) 2" Thick Wheel Adapters 4x4.5 to 5x4.5 12x1.5
Application
Description
Installation
Common mistake: the first step should be loosening the lug nuts rather than jacking up the vehicle. That’s because you cannot get enough torque on a wheel suspended in the air. So make sure loosening all the wheel lug nuts in turn with a spanner before jacking up the vehicle. Notification: Just Loosen them, there is no need to unscrew them completely.
Jack up and support the vehicle on the Jack stand, then remove the jack. Finally, remove all nuts and take away the wheels.
Clean gunk wire brush, put some Loctite on the hub and thread pitch. Avoid collision to the main part and install the wheel spacers to the vehicle.
Install the wheel spacers, but use the supplied lug nuts instead of the stock lug nuts. Place the wheel spacer on the studs of the hub. Make sure the studs of wheel spacers face outwards. Later, install the supplied lug nut in a star sequence. Notification:
Failure to clean up may cause a gap between the wheel spacer and the hub, which may allow a vibration of vehicle while driving. Place the spacer on the factory hub. The spacer should sit flush with the brake rotor. If there is any gap between the brake rotor and the spacer, even if it is small. Don’t use the spacer! Please be sure to check this. You shouldn’t even be able to slide a piece of paper the spacer on the factory hub.
Install the wheels to the wheel spacers. Please note that the wheel lug nuts should be fitted in the same way as the wheel spacers lug nuts ---- tighten the lug nuts in diagonal or star sequence. Again it is not necessary to fully fit the nuts in place for this step, just keep them for the next step. Notification: Fix in the order in which the pentagrams are drawn. In the case of six or more holes, fix them roughly in diagonal order.
Once everything is in place, drive the vehicle and check for any unusual vibration.
Warning
(California Customers should pay more attention about it.) Payment
We accept all ebay payment Shipping
99% of orders shipped within 24 hours. 2-8 days in transit. Nice and strong packing. UPS Return
This item is backed by our 1-year warranty. Refund will be given as money back or replacement Item must be returned in original pacakge and packing the same as received. Seller is responsible for the return if delivered item not the same as described or received damaged.
About Us
If you have a question about the item you should contact us before bidding. Any problem fund, do contact us please, any question or problem will be replied within 24 hours (except the weekend and holiday).
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
