AC Triac RF + Push Dimmer (S1-B)
RF dimming/Leading edge or trailing edge/Min brightness settable/Push Dim/Wall junction box mounting
Features:
● RF + Push AC phase-cut dimmer, 1 channel output. ● To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights. ● 256 levels 0-100% dimming smoothly without any flash. ● Leading edge dimming or trailing edge dimming set by dip switch. ● Min brightness can be set by key. ● Compatibility with Skydance’s 2.4G single zone or multiple zone dimming remote control. ● Connect with external push switch to achieve on/off and 0-100% dimming function. ● Easy to be placed in standard wall junction box behind a push switch.
What kind of Lamps compatiable with ?
● Dimmable LED lamps, Maximum load 200W @ 240V, 100W @ 110V, Due to variety of LED lamp designs, maximum number of LED lamps is further dependent on power factor result when connected to dimmer. ●Triac Dimmable LED drivers,Maximum load 200W @ 240V, 100W @ 110V, Maximum permitted number of drivers is 200W divided by driver nameplate power rating, and make sure the surge current is no more than 2 times 65A. ●Incandescent lighting and HV Halogen lamps, Maximum load 400W @ 240V, 200W @ 110V.
Push Dim Function:
You can also add a push switch to realize dimming.
● Short press: Turn on or off light.
● Long press (1-6s): Press and hold to step-less dimming,
With every other long press, the light level goes to the opposite direction.
● Dimming memory:
Light returns to the previous dimming level when switched off and on again, even at power failure.
Min brightness setting
Long press Min set key for 2s, the light blink 2 times, ready for min brightness set,
Then short press Min set key 1-6 times, to get 6 min brightness: 5%, 10%, 15%, 20%, 25% or 30%,
The light will output the current min brightness immediately,
Long press Min set key for 2s or wait 8s, quit min brightness set, the light will output 100% brightness automatically
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
● Match:
Short press match key, immediately press on/off
key (single zone remote) or zone key (multiple zone
remote) of the remote。
● Delete:
Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted
Use Power Restart
● Match:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote)or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
● Delete:
Switch off the power, then switch on power again,
immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
