Feature:
1. Three-color lights and sounds prompt the machine status.
2. When the air pressure of the air machine is unstable, the machine turns on the protection function to protect the milling machine.
3. The machine is equipped with a 1080P camera, which allows you to observe the operating status when leaving.
4. The overall accuracy of our milling machine is less than 20 microns, and the parameter value can be adjusted to six decimal places.
5.Screw grade: Grade 5 0.0008mm, 0 errors will be reported during processing, and errors will only be reported when abnormalities occur when changing tools.
6. Fast after-sales service.
When you receive the machine, we will provide the fastest technical support until you start using the machine.
Every time there are any problems with machine operation, we will provide solutions online in a timely manner.（The technical team will communicate with you on WhatsApp）
We want this machine to be easier for our customers to use and work with, that's why this machine was designed.
Competitive edge：
Our milling machine is not calibrated automatically, it is manually.
Advantages of manual calibration: Manual calibration can be used for a long time. Automatic calibration requires frequent calibration. After one year, automatic calibration will become unstable, and manual calibration has a longer service life. If our milling machines are well maintained, they can last for one year without calibration.
Closed loop stepper motor with encode
D11 power:
5-axis cutting
The total power of the machine: the power supply of the machine is 1200W and the frequency conversion of the spindle is 800W, totaling 2000W.
5-axis motor torque: AB axis 2.2NM, Y axis 3.0NM, ZX axis 3.3NM
NOTE:The sale of this item may be subject to regulation by federal and provincial regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
1,High Purity Elema Technology
2,90mm Super-diameter tray,full mouth cavity tooth sintering withour pressure.
3,Pre-drying time can be set to completely dry the denture
4.The maximun temperature : 1550C,suitable for all zirconia
5,Maximum heating rate 200 degrees per minute
6,It is ready to use without preheating in advance
7. Automatic fast cooling technology
8. Closed silo design,with maximum safety(chair side)
9.Up to 50 teeth can be sintered(90mm tray *1)
10. Variable load design,automatic power regulation of sintering furnace(energy saving)
11.Language : Chinese,English,Spanish
12. Single or 3-unit-bridge,only need 1 hour
More than 7 unit bridges,Only need 4 hours.
Operation according to the sintering curves of different brands of zirconia
LD-VC1 Vacuum Cleaner
Thank you for choosing our company’s Automatic dedusting
Zirconia Vacuum Cleaner.Please read the below information before
using this product.
Product introduction
This product is used for filtering the dust generated during the
denture manufacturing process in the industrial denture
laboratory.This vacuum cleaner has the advantages of compact shape
and low noise ,strong suction and high efficiency,which can be used
in several circumstances.By using embedded microcomputer main
board,the control system can work under automatic running mode as
well as received running mode.This product can work with zirconia
engraving machine synchronously through digital signal connection.
This product has the function of automatic pulse
dedusting.When the device switches from running state to stop
state,control system automatically executes the recoil program and
cleans the dust adhere to the filter.No manual cleaning,easy to
clean.By setting air storage tank inside and using special structure
and deadening,the noise reduced distinctly.Don’t worry about the
noise during use.The high efficient fan makes sure the large suction
air and strong suction power and high dedusting efficiency.