Things Sought After Store

 

Polaris Ranger UTV Cab Enclosure - MIDSIZE

 

image

Features at a glance
  • Designed for specific model UTVs
    (see Compatibility section below)
  • Heavy-duty ProtekX6 fabric
  • Water-resistant exterior coating
  • Water-resistant vinyl backing
  • Enhanced venting system
  • Clear vinyl windows
  • Removable zippered doors
  • Rubberized cinch-tight straps
  • Tension panels with adjustable straps and click-close connectors
  • Manufacturer's warranty

 

Description

Provides protection for the passenger compartment from mud, rain, snow, wind and direct overhead sunlight. Zippered doors are completely removable and offer a convenient, affordable way to enclose the sides of the cab; helping to hold in heat during cold outings or to be removed when the cab gets to warm. The heavy-duty UV resistant woven polyester fabric with vinyl backing, along with the clear vinyl windows will help keep you clean, dry and comfortable.

IMPORTANT! Installation of the cab enclosure requires the removal of all accessories that are attached to the exterior of the roll cage (e.g. hard top roof).

 

Door Operation

To help you understand how the doors function, please note the following:

  • The doors are attached to the cab enclosure with heavy-duty plastic zippers.
  • Both driver and passenger doors zip closed toward the front of the vehicle and unzip toward the rear of the vehicle.
  • When zipped closed, the zipper pull that will be used to open and close the door will be located on the bottom front corner of the door near the floor. IMPORTANT! When sitting inside the vehicle, the operator must be able to adequately bend at the waist in order to reach the front zipper pull located near the floor.

Entering and Exiting the Vehicle

After the cab enclosure is fully installed and the doors are zipped closed, follow these instructions to enter and exit the vehicle:

  1. Grasp the front zipper pull and unzip the door toward the rear of the vehicle, stopping at the top rear corner of the door. (See note below)
  2. Enter the vehicle.
  3. Grasp the door, supporting it with one hand so that the zippers are aligned and near one another.
  4. Grasp the front zipper pull (now located at the top, rear corner of the door) and zip the door closed toward the front of the vehicle completely.
  5. To exit the vehicle, reverse the steps above.

Note: Optionally, you may roll the door toward the rear of the vehicle and secure it to the cab with the attached straps.

 

Features

  • Heavy-duty ProtekX6 Extreme polyester fabric with water-resistant PVC backing and exterior coating for maximum weather and abrasion protection.
  • Enhanced venting system integrated into the enclosure for added circulation.
  • Large clear vinyl windows.
  • Doors can be unzipped, rolled back and secured with the attached rip-and-grip straps or completely removed for easy cab access and increased ventilation in warmer weather.
  • Attaches to the roll cage and vehicle body with straps, tension panels, buckles and adhesive-backed rip-and-grip closure tabs for a weather resistant passenger compartment.
  • Two year manufacturer's limited warranty.

 

Product Details

Click an image below for a closer look at the high-quality craftsmanship built into these products. Note: Stock images below are for representation purposes only.

image

Removable Doors

Doors can be unzipped, rolled back and secured with the attached rip-and-grip straps or completely removed if desired.

image

Cinch-Tight Straps*

Rubberized cinch-tight straps grip the roll cage pillars for a secure installation.

image

Rip-n-Grip Strips*

Adhesive backed rip-n-grip strips for a quick and secure installation.

image

Tension Panel Straps*

Adjustable straps with click-close connectors are attached to tension panels that keep the roof material taunt on the roll cage.

image

Strap Keeper*

A strap keeper is included on long straps for an organized clean look.

image

Venting System

Enhanced venting system integrated into the enclosure for added circulation.

image

Easy Storage

Folds flat for easy storage when not in use.

image

ProtekX6™ Extreme

Heavy-duty ProtekX6 Extreme polyester fabric with water-resistant PVC backing and exterior coating for maximum weather and abrasion protection.

 

Compatibility

This item is designed to fit the following:

image

  • SPECIFIC Polaris Ranger Vehicles

    IMPORTANT! See compatibility chart below for details

 

YEAR COMPATIBLE MIDSIZE POLARIS RANGER VEHICLES CHASSIS
SIZE
2019 500 EFI/EPS; 570 Mid-Size EFI/EPS (2-seatbelts and no headrests); EV; MID
2020 500 EFI/EPS; 570 Mid-Size EFI/EPS (2-seatbelts and no headrests); EV; MID
IMPORTANT! If you don't see your vehicle listed above, see the chart below for links to similar accessories for additional vehicles from this manufacturer.
07.55

Additional Vehicles

Below is a list of additional vehicles that are similar to the those listed in our Compatibility section above. These vehicles may not be compatible with the item being sold in this listing. It is recommended that you locate your vehicle in the list below and navigate to the corresponding products using the link provided.

YEAR ADDITIONAL VEHICLES FROM THIS MANUFACTURER CHASSIS
SIZE
2015 570 Mid-Size EFI/EPS (2-seatbelts and no headrests); ETX; EV; Li-Ion EV;

Click here to see similar accessories for these vehicles.
MID
2016 570 Mid-Size EFI/EPS (2-seatbelts and no headrests); ETX; EV; Li-Ion EV;

Click here to see similar accessories for these vehicles.
MID
2017 500 EFI/EPS; 570 Mid-Size EFI/EPS (2-seatbelts and no headrests); EV; Li-Ion EV;

Click here to see similar accessories for these vehicles.
MID
2018 500 EFI/EPS; 570 Mid-Size EFI/EPS (2-seatbelts and no headrests); EV; Li-Ion EV;

Click here to see similar accessories for these vehicles.
MID
2021 500 EFI/EPS; 570 Mid-Size EFI/EPS (2-seatbelts and no headrests); EV;

Click here to see similar accessories for these vehicles.
MID
2022 500 EFI/EPS; EV;

Click here to see similar accessories for these vehicles.
MID
IMPORTANT! If you don't see your vehicle listed in either of the charts above or you need help choosing the correct accessories for your vehicle, please have your 17-character Vehicle Identification Number (VIN) available and contact us for assistance before purchasing.

 

Specifications

  • Color/Pattern: Black/Solid
  • Materials:
    • Fabric: Heavy-duty ProtekX6 Woven Polyester
    • Undercoating: PVC (laminated to the polyester fabric)
    • Clear Windows: PVC (poly vinyl chloride)
    • Click-Close Connectors: Plastic
    • Quick-Release Buckles: Plastic
    • Loop Rings: Plastic
    • Straps with connectors or buckles: Nylon
    • Straps with loop rings: Rubberized Nylon with Hook & Loop Fastening System
    • Ladder Lock Buckles: Plastic
    • Rip-N-Grip Straps: Nylon web straps with hook and loop fastening system
    • Rip-N-Grip Strips: Adhesive-backed nylon strips with hook and loop fastening system
    • Zippers:
      • Slider: Metal
      • Pull Tab: Metal
      • Chain: Plastic

 

Included with this Purchase

(1) - UTV Cab enclosure which includes the following components:

  • Front windshield (integrated)
  • Roll cage top (integrated)
  • Rear window (integrated)
  • (2) Zippered doors (removable)
  • (1) Roll of adhesive-backed rip-n-grip tape (hook-n-loop)
 

Shipping Information

Things Sought After utilizes many different shipping carriers. We reserve the right to ship your item(s) with the carrier of our choice.

International Buyers - Import duties, taxes and customs clearance charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.