Selling Point:
1) Good light type, Low power consumption and super bright lighting,the position of the light-emitting point is 1:1 to the original car halogen lamp.
2) No delay to light up, Faster on/off response time, low power consumption and high lighting,Good Quality And Durable,Easy to Install,Good Feel.
3) Lifespan: Up to 50,000 hours working hours, stable quality, long service life, adopt imported chips emit 360 degree light can light up every corner.
4) The model is as the same as factory light, no need to change car wire rute, for most cars, just Plug and Play, NO modification required A direct replacement part that easy to install.
5) With High-purity brightness, strong penetrability and superior stability,Energy saving, environmental protection, through strict test, Use safer driving in the car,highly recommended.
6) With a copper base board, cold pressed aluminum heat sink and EMC anti-electromagnetic interference. Better solve the dimming or over heated of led bulbs.
7) Anti-electromagnetic interference.
8) No Decoding Error, As the power of a single H11 led bulb is 55W, the same high as a stock halogen bulb, these bulbs can directly alleviate decoding problems, no warning on the car computer/dashboard. The 6A overload capacity of F22 H13 bulbs, a threefold increase over standard leds, perfectly solves the problem that many LEDs burn out due to excessive startingcurrent.
Parameter:
Model: HB2 (9003) H4
Power: 45 W/per bulb,90 W/per pair
Lumens: 10000 lm/per bulb, 20000 lm/per pair
Color Temperature: 6000K White
Light source: CSP (3055)
Certified by: CE & ROHs
Voltage: DC 9V-32V(Fit 12V/24V vehicle)
Warranty: 2 YEARS
Lifetime: More than 50000 hours
Placement on Vehicle: Front, Left, Right
Applicable Used as a: Headlight
Suitable For Motorcycle, Motorbike, Bike, car, van, truck, pickup, SUV, bus, off-road, ATV, Wagon, UTB, forklift, tractor etc.
Package include:
1x Pair (2pcs) H4 (9003) HB2 led bulbs
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
