Description:1.Color: Red2.Material: Aluminum Alloy (this is thin aluminum)3.Sizes: Gas – 15cmx7cm, Brake & Clutch – 9cmx6.5cm4.Thickness: 0.5cm Features:1.Creative and fashionable design2.Fit for most types of car.3.Easy installation, no drilling required and to reduce the fatigue during driving.4.Different design and size for choosing5.Several of colors to be selected Install:1. Fit straps with screws and nuts on each pedal pad. Then place the pedal in the right position to fold the strapsaround the original pedal.2. Fold the straps tight around the original pedals. Use the plier sand rags to fix the straps real tight so they cannot move anywhere.3. Check if straps can be folded around the pedals.Size and installation range:1. Two ...

Red Universal Non-Slip Automatic Gas Brake Foot Pedal Pad Cover Car Accessories

Description:
1.Color: Red
2.Material: Aluminum Alloy (this is thin aluminum)
3.Sizes: Gas – 15cmx7cm, Brake & Clutch – 9cmx6.5cm
4.Thickness: 0.5cm
 
Features:
1.Creative and fashionable design
2.Fit for most types of car.
3.Easy installation, no drilling required and to reduce the fatigue during driving.
4.Different design and size for choosing
5.Several of colors to be selected
 
Install:
1. Fit straps with screws and nuts on each pedal pad. Then place the pedal in the right position to fold the straps
around the original pedal.
2. Fold the straps tight around the original pedals. Use the plier sand rags to fix the straps real tight so they cannot move anywhere.
3. Check if straps can be folded around the pedals.
Size and installation range:
1. Two small plates 9cm * 6.6cm (. Length and width), four screws position width about 4.5cm, that is, the width less than 4.5cm, the length less than 9cm of the original car pedal can be installed;
2. The board is about 15.2cm in length and 8.2cm in width, and the width of the four screws is about 4.5cm, that is, the pedals less than 4.5cm in width and 15cm in length can be installed;
3. The installation diagram is attached on the back of the package. The fixing method is that the screw and 7-clip clip are attached to the original car pedal for fixing. There is no need to drill holes, so the installation is convenient.
4. General manual shift car are suitable, of course, there are individual car is not suitable, please measure the size of your car's pedal before you buy.


Item Specifics
Brand Unbranded
Type Foot Pedal
Sizes Gas – 15cmx7cm, Brake & Clutch – 9cmx6.5cm
Material Aluminum Alloy
Thickness 0.5cm
Color Red
Color Red

Payment

Buyers can use a variety of payment methods such as credit, debit, and gift cards; Apple Pay, Google Pay, PayPal, and PayPal Credit etc.

Shipping
1. All items will be shipped in 24 hours after receiving your payment .
2. We ship this item to US only via USPS first class mail. It usually takes 3-5 working days to deliver.
Returns
1. We offer 60 days return policy.
2. Please contact us with emai first if you have any questions with our products .
3. Refund will be sent after we got your returned package.
4. All returned items should be in the original packaging with tracking number.
Contact Us

We work from Monday - Saturday 9:00AM - 6:00PM PM, but we will reply you once we get your message .There will be some delay on response if you send message or E-Mail on Sunday.

Shop Category
 Store Home
 LED Headlights
 LED Fog/Driving Lights
 LED Turn Signal Lights
 LED Brake Lights
 LED Backup Reverse Lights
 LED Interior Lights
 Other
Hot Item
New List Item
Red Universal Non-Slip Automatic Gas Brake Foot Pedal Pad Cover Car Accessories

Description:
1.Color: Red
2.Material: Aluminum Alloy (this is thin aluminum)
3.Sizes: Gas – 15cmx7cm, Brake & Clutch – 9cmx6.5cm
4.Thickness: 0.5cm
 
Features:
1.Creative and fashionable design
2.Fit for most types of car.
3.Easy installation, no drilling required and to reduce the fatigue during driving.
4.Different design and size for choosing
5.Several of colors to be selected
 
Install:
1. Fit straps with screws and nuts on each pedal pad. Then place the pedal in the right position to fold the straps
around the original pedal.
2. Fold the straps tight around the original pedals. Use the plier sand rags to fix the straps real tight so they cannot move anywhere.
3. Check if straps can be folded around the pedals.
Size and installation range:
1. Two small plates 9cm * 6.6cm (. Length and width), four screws position width about 4.5cm, that is, the width less than 4.5cm, the length less than 9cm of the original car pedal can be installed;
2. The board is about 15.2cm in length and 8.2cm in width, and the width of the four screws is about 4.5cm, that is, the pedals less than 4.5cm in width and 15cm in length can be installed;
3. The installation diagram is attached on the back of the package. The fixing method is that the screw and 7-clip clip are attached to the original car pedal for fixing. There is no need to drill holes, so the installation is convenient.
4. General manual shift car are suitable, of course, there are individual car is not suitable, please measure the size of your car's pedal before you buy.



Buyers can use a variety of payment methods such as credit, debit, and gift cards; Apple Pay, Google Pay, PayPal, and PayPal Credit etc.

1. All items will be shipped in 24 hours after receiving your payment .
2. We ship this item to US only via USPS first class mail. It usually takes 3-5 working days to deliver.
1. We offer 60 days return policy.
2. Please contact us with emai first if you have any questions with our products .
3. Refund will be sent after we got your returned package.
4. All returned items should be in the original packaging with tracking number.

We work from Monday - Saturday 9:00AM - 6:00PM PM, but we will reply you once we get your message .There will be some delay on response if you send message or E-Mail on Sunday.


All rights reserved.

On Sep 19, 2024 at 17:35:23 PDT, seller added the following information:

DataCaciques