Automotive four-wheel alignment magnetic level gauge liquid level gauge scale cam adjustment correction, view data aids
I Instructions for use.
1, Remove the four-wheel alignment sensor (fixture), remove the tyres.
2、Carefully suck the magnetic level on the side of the brake disc.
3、Adjust the level to zero position.
4、Install the special parts required for positioning.
5、Using the special tool, adjust the positioning parts to the required measuring angle with the help of the magnetic level indication.
6、If you find a little deviation, please re-measure the positioner, just fine-tune it under the car. (Generally speaking, small deviation will not cause positioning failure)
Next, use it.
For example, when using the four-wheel alignment instrument measurement data to determine the specified value of the calibration instrument measurement data cam greater than 1 degree below zero, you need to remove the alignment fixture, remove the tyres, replace the required four-wheel alignment special parts, this time you need to produce our magnetic leveling centre. In the past, when the operator adjusted the cam, he did it based on his own experience and sometimes made mistakes, with the level produced by our centre, you can very accurately adjust to the desired measuring angle.