Ultrasonic Flaw Detection Equipment with 0-10000mm DAC AVG TCG B Scan AWS D1.1

Introduction:

• Digital ultrasonic flaw detector is advanced type,, can quickly, easily and without damage, accurately detect, locate, evaluate and diagnose various defects inside the work-piece such as cracks, welds, pores, sand holes, inclusions, folding, etc. 

• It has been applied for electric power, petrochemical, boiler and pressure vessel, steel structure, military, aerospace, railway transportation, automobile, machinery and other fields. It is an essential instrument for the non-destructive.

• Measurement display mode: positive wave,negative wave, full wave and wave ; It has a linear suppression function, the maximum inhibition is 80% of the screen height; It can switch between single crystal probe, double crystal probe and two inspection modes; It has a gate setting and alarm function. The position and width of the gate can be arbitrarily set on the screen, and an incoming wave alarm can be set.

• 500 independent detection channels, each channel set a separate set of testing parameters, DAC curve; Two display modes with angle and K value; The DAC curve is generated automatically, and up to 10 points can be recorded, with four additional adjustable offset curves; AVG curve is generated automatically, and two types of defects can be customized; Automatic probe calibration function.

• With storage function, it can store 100 A sweep patterns, parameters and DAC curve; Has a storage graphics playback function, the stored A-scan graphics from the storage area and displayed on the screen; Has a delete function to delete the specified content (represented by the storage group number) from the storage area; Peak memory function.

• Freeze and thaw functions with waveform and inspection parameters; With sound path measurement and echo frequency analysis function; Real-time power status indication function; Support USB communication interface; Li-battery, low power consumption, can continuous working more than ten hours Can set up buzzer alarm during operation Light, convenient, easy to operate

Specification:

• Measuring Range (mm): 0 ~10000mm 
• Channels: 500 
• Frequency Range (MHz)：0.2 ~20MHz 
• Material Velocity (m/s): 1000 ~15000m/s 
• Vertical Linearity Error: ≤3% 
• Horizontal Linearity Error: ≤0.1% 
• Dynamic range: ≥32dB

Features:

• Automated calibration、Automated gain
• DAC、AVG、TCG、B scan、AWS
• High-speed capture and very low noise
• High contrast viewing of the waveform from bright
• Powerful pc software and reports can be export to excel

Functions:

• Automated display precise flaw location(Depth d、level p、distance s、amplitude、sz dB、ф);
• Automated switch three staff gauge ((Depth d、level p、distance s);
• Automated calibration of transducer Zero-point, Angles, Front edge and material Velocity;
• Convenient to make and use DAC、TCG and AVG to evaluate the echo, the curve can be modified and compensated
• 6dB DAC functions;
• 500 independence setup, any criterion can be input freely, we can work in the scene without test block;
• Big memory of 500 A graph;
• Automated gain and gain scan;
• Peak Hold and Peak Memory;
• B scan;
• AWS D1.1
• Automated make video of test process and play; use upan,the length of video is unlimited.
• Powerful pc software and reports can be export to excel;
• *Li battery, continue working time up to 12 hours;

Other Assistant Function:

• Display freeze;
• Automated echo degree;
• Angles and K-value;
• Lock and unlock function of system parameters;
• Electronic clock calendar ;
• Two gates setting and alarm indication;
• Gate and DAC alarm;

Specifications:

• Measuring Range (mm):0 ~10000mm
• Channels: 500
• Frequency Range (MHz)：0.2~20MHz
• Material Velocity (m/s): 1000 ~15000m/s
• Vertical Linearity Error: ≤3%
• Horizontal Linearity Error: ≤0.1%
• Sensitivity Leavings: ≥62dB
• Dynamic range: ≥32dB
• Resolving Power: ≥36dB
• Gain (dB): 0 ~120dB
• Measurement Mode: Single、Dual、Thru
• Reject: 0~80%
• Pulse Displacement (μs): -20 ~+3400
• Zero (μs): 0.0 ~99.99
• Port Type: BNC(Q9) or Lemo 01(C9)
• Operating Temperature (℃): -20~70
• H*W*D(mm): 240*156*48
• Weight (kg):1.0（with battery）

Technical Specification:

• Scan range (mm):0~10000
• Grades: 2.5,5,10,20, 30,40,50,60,70,80,90, 100,150,200, 250, 300, 350, 400, 450,500,600,700,800,900,1000,2000,3000,4000,5000,6000,7000,8000,9000, 10000.
• Adjusting step distance: 1mm
• Pulse shift ( ms ): -7to +9984
• Grades: -20, -10, 0.0, 10, 20, 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600,700,800,900,100,015,000,000,000,000,000,000.00
• Adjustment step:1（-7ms~9984ms）
• Probe zero point：0.0~99.99
• Adjust the step：0.01
• Material sound speed(m/s):
• Material sound speed:1000~15000
• 7 fixed sound speeds:2260,2730,3080,3230,4700,5900,6300
• Flaw detection sensitivity margin:³62dB
• Dynamic Range:³32dB
• Alarm:Incoming wave alarm
• Display screen:Display
• High-brightness color 5.7 in display
• A-Scan display area: Full screen or local; A-Scan shows freeze and thaw A-Scan fills
• Flaw detection channel:300
• Data storage:500 A-Scan graphics
• PC communication interface standard:USB
• Units of measurement:Mm
• Power Adapter: enter 100V~240V/50Hz~60Hz; Output 9V/1.5A
• Battery:Lithium (Li) Battery 5000mAh
• Working temperature (°C):-10~50°C
• Working humidity (RH):20%~90%
• Interface Type:BNC
• Dimensions (mm):220*140*50
• Weight(kg):1

Standard Configration: