X99 B9 Motherboard Specification: Brand: MACHINIST CPU Docket: LGA 2011-3 Chipset: Intel C612 Supported CPU Type: Supports Intel LGA 2011-3 Socket, like Intel Xeon e5-xxxx-v3, e5-xxxx-v4, Intel Core I7-6800K, and so on. Memory Type: DDR4 DIMM, supports desktop DDR4, server DDR4 (ECC, RECC), four channel, single-slot maximum support for 32GB of memory, the maximum memory capacity is up to 128GB (32GB * 4), the maximum frequency is up 2400MHz (this depends on CPU processor) Expansion Slot:1* PCI-E 3.0 x16, 1*PCI-E 2.0 x4, 1* PCI-E 2.0 x1 Storage: Supports M.2 SSD, SATA 2.5-inch/3.5-inch SSD, and mechanical hard drive. Supports SATA (NGFF)/PCI-e (NVMe) protocol switching, default state is NVMe M.2 mode. The NVMe M.2 mode is PCIe 3.0 x4 standards, the fastest read and write speed is up to 3600M/S. Sound Card : Realtek ALC897 high-fidelity sound card Network Card: Realtek 8111H Gigabit network card Size: 245*190*35 mm, M-ATX, Boot Shortcut Key: F11 Enter BIOS: Press the boot button, keep pressing the "DEL" key until the BIOS interface appears.
BIOS Features: Diskless Boot: Support Sleep: Does not support Above 4G Decoding: Support Virtualisation (VT-D): Support Re-Size BAR Decoding: Support Restore AC Power Loss: Support RAID: Support RAID0, RAID1, RAID5 Boot without Graphics Card: Support Memory Timing Modification (XMP): Does not support Fan Speed Modification: Support CPU_FAN1 interface only Power Supply:8-phase power supply (4 times the phase), PWM controller for the uP1649Q, each phase of the power supply MOS tube for a top and bottom, a total of 16 MOS tubes!
CPU and System Fan: CPU_FAN1: Supports intelligent temperature control, CPU temperature is high, fan speed is fast, CPU temperature is low, fan speed is low. SYS_FAN1: Does not support temperature control, the fan will run at full speed; SYS_FAN2: Does not support temperature control, the fan will run at full speed;
J_AUTO_ON1 Jumper Cap: It's Restore AC Power Loss jumper caps, default is OFF. If move the jumper cap to the right two pin for the "ON" state, when the motherboard is powered on, the motherboard will automatically boot.
How to Clear CMOS: Power off, and use tweezers or other metal conductive objects, short 2-pin JCMOS1 jumper for 3-5 seconds.
Important! - We don't have the User Manual & Driver in the packing box, But we have PDF versions of them, if you need them, please let us know, and we can send them to you via email. If you mind of those, please don't purchase., thank you for your understanding and time.
Notes: 1: The color of the slot bottom plate may vary from batch to batch, but it will not affect the use of the product. Products are continuously optimized and upgraded. 2: Please allow 1-3mm difference due to manual measurement. 3: Due to different monitors and different light, the pictures may not show the actual color of the goods. Thanks for your understanding. 4: This floor plan requires a strong power supply. Make sure your power supply is sufficient for this scenario. (at least 500w brand power supply) 5: The battery in the photo of the motherboard will be taken out before shipping, because China Post and Customs prohibit the use of batteries.