Specifications:

You can choose the value you want from the drop-down box above.

Features:

1.TiSiN coating on the cutting edge can be used for roughing to fine machining directly on heat-treated materials below 45°, which reduces the number of tool changes, improves the machine tool crop rate and saves manufacturing time. 

 

2.Precision grinding spiral groove, avoid staining the , greatly improve productivity.

3.Ensure that the cutting space under the conditions of the design of the large core diameter, greatly enhancing the rigidity of the tool and vibration resistance, to reduce breakage. 

4.The use of micro-particle tungsten steel base material, with higher wear resistance and strength is the exclusive milling for high hardness and high speed cutting applications.

5.Fully ground cutting edges are sharp, wear-resistant and durable, which ensures a longer service life of the milling .

 

6.Universal chamfering round shanks are easy to use, have good compatibility, enhance the milling vibration resistance and cutting speed, clamping tighter without slipping.

 

Instructions for use:
1. Before using the tool, please measure the tool offset, the tool offset accuracy of more than 0.01mm, please correct before cutting.
2. The shorter the length of the tool extends out of the chuck, the better, if the tool extends out longer, you need to reduce the speed, feed speed or cutting volume.
3. If abnormal vibration or sound occurs during cutting, please reduce the speed and cutting volume until the situation improves.
4. Spray and air-jet cooling of steel is preferred to improve the effect of the milling .

 

Tips:
01.Appropriately reduce the cutting speed and feed rate, can extend the life of the milling .
02.Need to add cutting fluid to protect the when working, so that the cutting is smoother.
03.When there is oxide film or other hardened layer on the surface of the workpiece, it can be removed by reverse milling.

 

 Attention: