CE Certificate Number：BYS-2024032235TCF
The
starting point for our milling machine is simple operation and fast after-sales
service.
Feature:
1.
Three-color lights and sounds prompt the machine status.
2.
When the air pressure of the air machine is unstable, the machine turns on the
protection function to protect the milling machine.
3.
The machine is equipped with a 1080P camera, which allows you to observe the
operating status when leaving.
4.
The overall accuracy of our milling machine is less than 20 microns, and the
parameter value can be adjusted to six decimal places.
5.W12
can cool the spindle through the spindle coolant, without the need to purchase
an additional water cooler.
6.W12
is suitable for burring needles with a diameter of 6mm. The needle has greater
grip and is not easy to slide.
7.W12
water pressure control: Low pressure will alarm, and high pressure will alarm.
After the alarm, the filter element needs to be cleaned, water or element
changed.
8.Screw
grade: Grade 5 0.0008mm, 0 errors will be reported during processing, and
errors will only be reported when abnormalities occur when changing tools.
9.
Fast after-sales service.
When
you receive the machine, we will provide the fastest technical support until
you start using the machine.
Every time there are any problems with machine operation, we will provide solutions online in a timely manner.（The technical team will communicate with you on WhatsApp）
We
want this machine to be easier for our customers to use and work with, that's
why this machine was designed.
NOTE: The operating software is free (it will be packed in a USB
drive and delivered to you), and the cutting machine supports most typesetting
software on the market, but CAM typesetting software is not free. You can
purchase it on the CAM official website or contact us for purchase.
| Product Parameters | |
| Name | 5 Axis Wet Milling Machine |
| Model | LD-W12 |
| 5axis | X, Y, Z, A, B |
| A axis | 360 degree |
| B axis | 30 degree |
| Tools | 10 pieces |
| Control System | Fly Motor |
| Milling Mode | Wet |
| Supply Voltage | 220V |
| Spindle Powder | 3KW |
| Rated Frequency | 50HZ |
| Air Pressure | 0.33-0.8 MPA |
| Speed of Spindle | 60000rpm/min |
| Motor and Drives | Closed loop stepper motor |
| Guide Rail | Pilotage |
| Ball Screw | Pilotage Grinding lead screw C5 grade |
| Slider | Model 20 heavy duty slide can be used for 8-10 years |
| Gantry Structure | Aluminium alloy 6061 |
| Application | Premilled abutment,glass ceramic,PMMA,PEEK |
| Process Time | Premilled abutment: 20~35mins Glass ceramic: 20~35mins PMMA: 20~30mins PEEK:20~30mins |
| Machine Size | W600*D450*H639 |
| Packing Size | W735*D590*H810 |
| Machine Weight | 110KG |
| Packing Weight | 144KG |