Creality Falcon2 Pro 60W Enclosed Laser Engraver 25000mm/min Speed w/1.6W Module
Feature:
【Creality Updated Falcon2 Pro】Pro 60W laser engraver with its own fully transparent protective laser enclosure, and when the lid is closed, the built-in fan,LED work light and air-assist will automatically start working. Also comes with an metal steel bar support and tray for perfect replacement of honeycomb table. It also comes with a 1.6W module that allows you to accomplish finer engraving tasks.This engraver truly allows engraving enthusiasts to create all-in-one creations.
【3-in-1 module】With this 60W module, you have 3 gears to switch between 22W/40W/60W. 𝗣𝗿𝗲𝗰𝗶𝘀𝗲 (22W) - more precise engraving. 𝗡𝗼𝗿𝗺𝗮𝗹 (40W) - fast engraving and cutting. 𝗣𝗼𝘄𝗲𝗿𝗳𝘂𝗹 (60W) - super powerful cutting mode. You can choose the right mode for engraving or cutting work according to different tasks.
【The Most Powerful 60W】 Pro 60W engraver has max 240W machine power and 60W output power,It can cut a 25mm basswood board,35mm black acrylic or 0.3mm stainless steel sheet in one pass, at a speed up to 25000mm/min,with 2x faster engraving speed, you can complete your engraving artwork quickly and well.
【Precisely Engraving & Cutting】 Falcon 2 Pro Engraver has precision craftsmanship with both engraving and cutting.Using the fast mode for engraved painting and the slow mode for cutting.The machine with all aluminum alloy made structure and steel shaft wheel guide rail and 0.06*0.1mm super fine spot focus, enable engraving&cutting accuracy precisely controlled within 0.003 inches.
【Absolutely Safe】When the lid is closed and the machine starts working,the fan and air assist will start working at the same time, and the module has 3 indicator lights (airflow monitor/lens monitor/flame monitor) will light up, so that you can monitor the progress of the engraving at any time to see if it is normal. The machine stops working when the lid is opened or the tray is pulled out, or if the machine is accidentally, tipped over or dropped, the buzzer and indicator lights will sound an alarm. The machine is equipped with a safety lock and an emergency stop button, so that if an emergency occurs during operation, the machine can be stopped manually immediately.
【New Camera Positioning】Falcon2 Pro series engraving machine new camera positioning function, you need to connect to the computer, follow the installation steps to set up the parameters related to the camera, you can call up the camera on the software to use (only connect to the computer to use). The camera function can provide better pattern positioning, and more games are expected to be unlocked by the enthusiasts.
【Easy To Operate】Falcon2 Pro Engraver can be compatible with various mature engraving software, LightBurn for experirenced user and LaserGRBL for new user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data TF card and use Creality cutter and engraver machine anytime and anywhere.One-button management make it so easy for you to use anywhere and anytime.
【3-in-1 module】With this 60W module, you have 3 gears to switch between 22W/40W/60W. 𝗣𝗿𝗲𝗰𝗶𝘀𝗲 (22W) - more precise engraving. 𝗡𝗼𝗿𝗺𝗮𝗹 (40W) - fast engraving and cutting. 𝗣𝗼𝘄𝗲𝗿𝗳𝘂𝗹 (60W) - super powerful cutting mode. You can choose the right mode for engraving or cutting work according to different tasks.
【The Most Powerful 60W】 Pro 60W engraver has max 240W machine power and 60W output power,It can cut a 25mm basswood board,35mm black acrylic or 0.3mm stainless steel sheet in one pass, at a speed up to 25000mm/min,with 2x faster engraving speed, you can complete your engraving artwork quickly and well.
【Precisely Engraving & Cutting】 Falcon 2 Pro Engraver has precision craftsmanship with both engraving and cutting.Using the fast mode for engraved painting and the slow mode for cutting.The machine with all aluminum alloy made structure and steel shaft wheel guide rail and 0.06*0.1mm super fine spot focus, enable engraving&cutting accuracy precisely controlled within 0.003 inches.
【Absolutely Safe】When the lid is closed and the machine starts working,the fan and air assist will start working at the same time, and the module has 3 indicator lights (airflow monitor/lens monitor/flame monitor) will light up, so that you can monitor the progress of the engraving at any time to see if it is normal. The machine stops working when the lid is opened or the tray is pulled out, or if the machine is accidentally, tipped over or dropped, the buzzer and indicator lights will sound an alarm. The machine is equipped with a safety lock and an emergency stop button, so that if an emergency occurs during operation, the machine can be stopped manually immediately.
【New Camera Positioning】Falcon2 Pro series engraving machine new camera positioning function, you need to connect to the computer, follow the installation steps to set up the parameters related to the camera, you can call up the camera on the software to use (only connect to the computer to use). The camera function can provide better pattern positioning, and more games are expected to be unlocked by the enthusiasts.
【Easy To Operate】Falcon2 Pro Engraver can be compatible with various mature engraving software, LightBurn for experirenced user and LaserGRBL for new user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data TF card and use Creality cutter and engraver machine anytime and anywhere.One-button management make it so easy for you to use anywhere and anytime.
Specifications:
| Brand | Creality |
|---|---|
| MPN | Does not apply |
| Machine Power (MAX) | 360W |
| Optical Power | 60W+1.6W |
| Product Size | 664*570*328.4mm |
| Equipment Weight | 19.51kg |
| Input Voltage | 100-240V~ 50-60Hz |
| Output Voltage | DC 24.0V 15.0A |
| Operating Temperature | 5℃-35℃ |
| Engraving Area | 400mm*400mm |
| Laser Source | Diode Laser |
| Laser Spot | 0.08*0.15mm |
| Laser Wavelength | 455±5nm |
| Laser Class | Class 1(FDA) |
| Laser Engraving Software | LightBurn、LaserGRBL |
| Operating System | Windows/MacOS |
| Supported File Formats | Jpeg, jpg, png, bmp, svg, dxf, etc. |
| Supported Materials | Cardboard, wood, bamboo, rubber leather,etc. |
| Certifications | EC60825、FDA、CE、ROHS、FCC、 UKCA,etc. |
| Gross Weight | 25.74KG |
| Package Size | 770*645*285 |
Product Description:
