| Improved Brake Fluid Tester This professional brake fluid tester is equipped with an easy-to-use printer, making it easier for car enthusiasts to record test data and much easier for automotive maintenance technicians to display brake fluid condition to car owners. Features: 1.【Brake Fluid Tester with Printer】Compared with the common brake fluid test pens on the market, this latest generation brake fluid tester supports on-the-spot printing of test reports, which can display all test data, prompt information, set date, VIN number and other information. This makes it easier for the service technician to present the condition of the brake fluid to the car owner. 2.【High-sensitivity probe and LCD display】The gooseneck probe of the brake fluid tester is very flexible, which improves the working efficiency, and the surface is resistant to oil and oxidation and does not corrode easily. 240mm stainless steel probe and high-precision sensor can quickly and accurately detect the quality of brake fluid. 3.【Backlight & Audible and Visual Prompt】The car brake fluid tester has an ultra-clear large screen display and supports backlight, so it can easily work in the sun or at night. When the brake fluid tester detects that the water content is too high, the display flashes and beeps to remind you that the brake fluid needs to be replaced. 4.【Available for DOT3/DOT4/DOT5.1】The upgraded version of brake fluid tester can quickly detect the water content of car brake fluid (brake oil), and check whether it is qualified, and remind you to replace the brake fluid when necessary. The automotive brake fluid tester is easy to use and is suitable for detecting three common brake fluids: DOT3/DOT4/DOT5.1. 5.【Powered by 12V Automotive Battery】This brake fluid detector has a built-in high-precision detection probe and a simple operating pressure gauge. This professional brake fluid tester is a high-end technical product in the car repair industry and a must-have product for brake fluid maintenance in professional car repair shops. |
| • Sound And Light Alarm If the tester detects that the water content is too high, the backlight flashes and a prompt sounds. |
| •Switch Detection With One Click Easy to operate, suitable for the detection of three conventional brake fluids: DOT3/DOT4/DOT5.1. |
| • Printing Of Test Reports Supports the real-time printing of measurement data and Setting the date, VIN number, etc.Makes it easier for the technician to present the brake fluid condition to the owner. the owner. |
| • Mode Of Operation 1) Connect the red and black terminals to the positive and negative terminals of the car battery to turn on the tester. 2. Press the left and right buttons to select the brake fluid to be tested and then press the confirmation button. Dip the test probe into the brake fluid and press the confirmation button to perform the test. 3. The test result is shown on the LCD display. Different results refer to different displays. 4. Press the confirmation button to open the print interface. Date and VIN number (last 4 digits) can be set. Press the left or right button to increase or decrease the digits. Press the confirmation button after each digit is confirmed to move the cursor to the next digit and so on. After all settings are completed, press the confirmation button to print the test result. |
| Specification |
| Brake fluid type:DOT3 / DOT4 / DOT5.1 |
| Power supply:DC 9V - 24V |
| Operating temperature:0 ℃ ~ 50 ℃（32 ℉ ~ 122 ℉ |
| Package list:1 roll printing paper;1xmain unit;1x crocodile clip;1xprobe;1xuser manual |
