MINI Master Security Locking Wheel Nut Key Lock Bolt Match Matching Service
Bmw MINI Wheel Locking Nut Matching Service
100% Brand New & High Quality.
Features:
The wheel lock lug nut is used to remove or lock the wheel anti-theft screw.
Match key pattern to the locking lug nuts on your vehicle.
Made of quality material that is wear-resistant and durable and rustproof.
Not intended for use with an impact wrench.
This is a non-OEM product, accessory only!
Specification:
Condition: Brand New
Color: Silver Tone
Material: Metal
Wheel Lock Lug Nut Dimension: 39x29mm / 1.54"x1.14"(H*D)
Inner Diameter: 24.5mm / 0.96"
Type: 061/062/063/064/065/066/067/068/069/070/071/072/073/074/075/076/078/079/080/Full set of 20pcs
Note:
To save your time, please carefully check and compare the shapes and marks of wheel lock keys pictured before purchase.
Please allow 1-2cm differences due to manual measurement.
Correct disassembly and assembly method:
1. When removing the screw, spray the bolt loosening agent on the bolt cone several times. Wipe the dirt and rust on the head with a dry cloth to ensure that there is no dirt in the groove.
2. Put on the anti-theft screw sleeve. The head on the sleeve should be completely inserted into the groove of the screw, and it must be inserted to the end.
3. Using a pneumatic wrench to disassemble and assemble the anti-theft screw may damage the screw or sleeve. Therefore, it is not recommended to use a pneumatic wrench for installation. Manual tools can be used for installation. The torque should be controlled below 140N.M (the torque of the tire anti-theft screw < 140N.M).
4.The long sleeve with plastic ferrule protects the hub from wear. When the key is used to disassemble and assemble the screw, the direction of the torque shall be perpendicular to the axial direction of the screw, and the plum blossom shall be completely inserted into the plum blossom groove. If the method described above is not used, the sleeve or screw will be damaged.

