Flow Rate Parameters.
JellySpray
The flow rate of water at 3kg air pressure is.
0.5mm hole:2.8 litres/hour 0.8mm hole:4 litres/hour
1.0mm hole:5 litres/hour 1.5mm hole:9 litres/hour 2.0mm hole:14 litres/hour 2.5mm hole:17 litres/hour 3.0mm hole:20 litres/hour 3.5mm hole:23 litres/hour
4.0mm hole: 26 litres/hour
Spray angle: spray angle 15-40 degrees
Spray technology
Material:304 stainless steel
Hole Diameter.
0.5MM, 0.8MM, 1.0MM, 1.5MM, 2.0MM, 2.5MM, 3.0MM, 3.5MM, 4.0MM optional
Installation: Style 1,2,3: bottom inlet 2 minutes (1/4) teeth, side inlet liquid 1 minute (1/8) teeth Style 4: bottom inlet liquid M12 * 1.25 teeth, side inlet 1 minute (1/8) teeth
Instructions for use.
Air inlet air pressure with air pressure regulator valve control at 0.3MPA (3kg) or so, into the liquid is static liquid placed under the nozzle from the nozzle not more than 1.5 metres away!
Application:Jet Power Spraying Service
Widely used in vegetable oil, diesel, heavy oil, alcohol-based fuel and other kinds of gas, combustion spray system, lubrication of working parts, humidification, space humidification, disinfection and other applications.