This is zinc alloy vandal proof access control keypad with RFID reader, it supports up to 2000 users in card, 4-digit password, or card + password. Combine with outdoor door lock, it helps to improve access security.
Note:
- Wire connection diagram is in power supply manual
- Keypad and lock can prevent light rain, NOT prevent heavey rain or storm
Packing List (bulk pack):
- 1 x Access control keypad
- 1 x Magnetic electric lock
- 1 x Power supply 12V 3A
- 1 x Exit button
- 10 x RFID keychain
Keypad Features:
- Zinc alloy electroplated, Anti-Vandal
- Supports up to 2000 users (card, 4-digit password, or card + password)
- Blacklight keypad
- Work standalone or connect to Wiegand 26
- Fully programming from keypad
- Adjustable door output time, alarm time, door open time
- User Capacity: 2000
- PIN Length: 4 digits
- Operating Voltage: 12V DC
- Idle Current: 25mA
- Active Current: ≤60mA
- Lock Output Load: Max 3A
- Alarm Output Load: Max 20A
- Wiegand Interface: Wiegand 26 bits output
- Adjustable Door Relay Time: 0 - 99 seconds
- Adjustable Alarm Time: 0 - 3 minutes
- Wiring Connection: Electric lock, Exit button, External alarm, External reader
- Operating Temperature: -45℃~ 60℃ / -49℉~140℉
- Operating Humidity: 10%RH~90%RH
- Physical: Zinc-Alloy
- Size (LxWxH): 120 x 76 x 20mm (4.72 x 2.99 x 0.79 inch)
Lock Features:
- Aluminum shell adopts high strength material, with hard anodised processing
- Inside circuit board is hiding to avoid water
- Use magnetic power to lock the door, 280kg (600 lb) holding force
- Built-in reverse current protection device (MOV)
- Can be opened by push button, remote controller... etc
- Fit for wooden door, metal door, glass door, fireproof door... etc
- Corrosion resistant, durable to use
- Current draw: 400mA 12V DC
- Pull Force: 280kg (600 lb)
- Working Mode: Power-on to lock
- Material: Aluminum alloy
- Lock size: 25 x 4.7 x 2.6cm (9.84 x 1.85 x 1.02 inch)
- Plate size: 18 x 3.8 x 1.1cm (7.08 x 1.49 x 0.43 inch)
Power Supply Features:
- Power supply switch is built-in EMI filter
- 100% full load burn-in test
- Low output ripple and noise
- Over load/over voltage/short circuit protection
- Based delay control circuit, lock time can be in 0 to 15 seconds
- Set NC / NO output, can control various types of electric locks
- Can reduce the load of access controller, save wiring to reduce the hidden trouble
- Input voltage: AC 110V to 240V, 50Hz to 60Hz
- Output voltage: DC 12V, 3A
- Output contact: Access Control, Electric Lock, Release Button
- Time relay: 0 to 15sec
- Standard design: Steel material, Painted
- Size: 120 x 95 x 38mm (4.72 x 3.74 x 1.49 inch)
- Weight: 326g (0.72 lb)
Exit Button Features:
- User friendly, push for openning the door
- compatible with most access control/ locking devices
- Current rating: DC 36V/3A
- Mechanical life: 500000 tested
- Material: Hard plastic
- Size: 85 x 85mm (3.34 x 3.34 inch)
- Weight: 54g (0.12 lb)
RFID Key Features:
- RFID tag for normal RFID reader only, not for special encrypted reader like HID
- Compatible with all door entry system to gain access
- No external power required
- Detecting distance: 3-10cm
- Size: 36 x 26 x 6.6mm (1.42 x 1.02 x 0.26 inch)
- Weight: 7.7g (0.02 lb)
- Color: Blue