Sommerfeld's Tools Router Table System

Our extruded aluminum table measures 36" x 27" which gives you plenty of support for your largest workpieces.

The opening (without insert rings) is 3-5/8" diameter which accepts even your largest panel-raising bits.

Five pre-drilled holes for mounting the Triton 3-1/4 HP router.

Top Includes:

• 
  
  
  (8) twist-lock Insert Rings



• 
  
  
  Spanner Locking Wrench



• 
  
  
  DVD3 - Router Tables Made Easy



• 
  
  
  Assorted mounting hardware



• 
  
  
  16-page full-color instruction book

Our easy adjusting Fence is 48" x 4-3/4"

Spring-loaded Pin allows rapid pivot adjustments of Fence from one end - or use Locking Knobs on both Fence ends if you prefer when working with cumbersome workpieces.

Fence can be swapped end-for-end, allowing work from either side of Table.

4-step Dust Port slides captive over full length of Fence in dovetail slots.  Slide out of the way to access bit area for cleaout - accepts 1-1/4", 1-1/2", 2", & 2-1/4" I.D. fittings.

Three T-slots for attaching stops, hold-downs or similar devices using 5/16" bolts w/ 1/2" hex heads.  Another slot of Fence face for mounting HDPE Sub-fences.

HDPE Sub-fences can be shimmed from behind for outfeed support when making full-height edge cuts.

Zero clearance fence inserts can be customized to match your bits.

Fence Includes:

• 
  
  
  (2) HDPE Sub-fences



• 
  
  
  (3) Zero Clearance Inserts



• 
  
  
  4-step Dust Port



• 
  
  
  5-32" Allen Driver



• 
  
  
  Fence Guard



• 
  
  
  Assorted hardware package



• 
  
  
  Tapes

• Our extruded aluminum table measures 36" x 27" which gives you plenty of support for your largest workpieces. The opening (without insert rings) is 3-5/8" diameter which accepts even your largest panel-raising bits.
• Five pre-drilled holes for mounting the Triton TRA001 3-1/4 HP router. Top Includes: (8) twist-lock Insert Rings Spanner Locking Wrench DVD3 - Router Tables Made Easy Assorted mounting hardware and 16-page full-color instruction book.
• Our easy adjusting Fence is 48" x 4-3/4" Spring-loaded Pin allows rapid pivot adjustments of Fence from one end - or use Locking Knobs on both Fence ends if you prefer when working with cumbersome workpieces. Fence can be swapped end-for-end, allowing work from either side of Table.
• 4-step Dust Port slides captive over full length of Fence in dovetail slots. Slide out of the way to access bit area for cleaout - accepts 1-1/4", 1-1/2", 2", & 2-1/4" I.D. fittings.
• Also available as a package with out Triton 3-1/4 HP Router Motor if you dont have one. No need for a $430 router lift, as this router motor and table combination make the lift unnecessary